home *** CD-ROM | disk | FTP | other *** search
/ Best of www.BestZips.com (Collector's Edition) / Best of WWW.BESTZIPS.COM Collector's Edition (JCSM Shareware) (JCS Marketing).ISO / music___ / me423.zip / MEPRG1.DAT / MUSICEZ.DOC < prev    next >
Text File  |  1996-02-14  |  199KB  |  4,256 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.                                          TM
  12.                                 MusicEase    4.2
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19.  
  20.  
  21.  
  22.  
  23.                                   August 1995
  24.  
  25.  
  26.  
  27.  
  28.  
  29.                        Copyright 1993-1995 by Gary Rader
  30.                          All Rights Reserved Worldwide
  31.  
  32.                                   Published by
  33.                              RMH Computer Services
  34.                                    PO Box 657
  35.                            Beech Grove, IN 46107-0657
  36.                                     U. S. A.
  37.                                  (317) 782-9903
  38.  
  39.  
  40.                                _______
  41.                           ____|__     |               (R)
  42.                        --|       |    |-------------------
  43.                          |   ____|__  |  Association of
  44.                          |  |       |_|  Shareware
  45.                          |__|   o   |    Professionals
  46.                        -----|   |   |---------------------
  47.                             |___|___|    MEMBER
  48.                
  49.  
  50.  
  51.  
  52.  
  53.  
  54.  
  55.  
  56.  
  57.  
  58.  
  59.  
  60.      Information in  this document  is subject to change without notice and
  61.      does not represent a commitment on the part of RMH Computer Services.
  62.      Portions of this software are copyrighted by The Soft Warehouse, Inc.
  63.  
  64.  
  65.      MusicEase is a trademark of Grandmaster, Inc.
  66.  
  67.      muLISP is a trademark of Soft Warehouse, Inc.
  68.  
  69.      Hercules is a trademark of Hercules Computer Technology.
  70.  
  71.      IBM is a registered trademark of International Business Machines
  72.      Corporation.
  73.  
  74.      Microsoft and MS-DOS are registered trademarks of Microsoft
  75.      Corporation.
  76.  
  77.  
  78.  
  79.      RMH Computer Services is a member of the Association of Shareware 
  80.      Professionals (ASP).  ASP wants to make sure that the shareware 
  81.      principle works for you. If you are unable to resolve a 
  82.      shareware-related problem with an ASP member by contacting the member 
  83.      directly, ASP may be able to help. The ASP Ombudsman can help you 
  84.      resolve a dispute or problem with an ASP member, but does not provide 
  85.      technical support for members' products.  Please write to the ASP 
  86.      Ombudsman at 545 Grover Road, Muskegon, MI 49442-9427 USA, FAX 
  87.      616-788-2765 or send a CompuServe message via CompuServe Mail to ASP 
  88.      Ombudsman 70007,3536.
  89.  
  90.  
  91.  
  92.  
  93.  
  94.  
  95.                               MusicEase  -  Contents  i
  96.  
  97.  
  98.           CONTENTS........................................................i
  99.  
  100.           1   INTRODUCTION................................................0
  101.           WHAT IS MUSICEASE?..............................................0
  102.           SUPPORT POLICY..................................................2
  103.           SYSTEM CONTENTS.................................................2
  104.           SYSTEM REQUIREMENTS.............................................3
  105.           MAKING A WORKING COPY...........................................3
  106.           KEYBOARD NOTATION...............................................5
  107.  
  108.           2   FUNDAMENTALS................................................7
  109.           STARTING MUSICEASE..............................................7
  110.           THE MUSICEASE SCREEN............................................8
  111.           USING THE MENU SYSTEM...........................................9
  112.           LINE EDITING...................................................11
  113.           QUITTING MUSICEASE.............................................12
  114.           EXECUTING DOS COMMANDS.........................................12
  115.           CHANGING SCREEN COLORS.........................................13
  116.           SAVING THE CURRENT STATE.......................................13
  117.           TERMINOLOGY....................................................14
  118.  
  119.           3   BASIC EDITING..............................................16
  120.           SETTING THE METER..............................................16
  121.           SETTING THE CLEF...............................................16
  122.           SETTING THE KEY SIGNATURE......................................17
  123.           INSERTING A BARLINE............................................18
  124.           CREATING A NEW STAFF...........................................18
  125.           CREATING A SYSTEM..............................................18
  126.           SETTING THE CURRENT NOTEHEAD SHAPE.............................19
  127.           ENTERING NOTES.................................................19
  128.           ENTERING RESTS.................................................20
  129.           SETTING THE CURRENT DURATION...................................21
  130.           CHANGING VOICES................................................21
  131.           DELETING NOTES.................................................21
  132.           CREATING CHORDS................................................22
  133.           REPLACING NOTES................................................22
  134.           CHANGING THE DURATION OF THE CURRENT NOTE......................22
  135.           CHANGING THE PITCH OF THE CURRENT NOTE.........................23
  136.           REPEATING A NOTE OR CHORD......................................23
  137.           JOINING TWO NOTES INTO ONE LONGER NOTE.........................23
  138.           INSERTING INVISIBLE NOTES......................................23
  139.           CURSOR MOVEMENT................................................24
  140.           ZOOMING........................................................25
  141.           THE BLOCK......................................................26
  142.           STARTING A NEW PAGE............................................27
  143.           CLEARING THE CURRENT WINDOW....................................27
  144.           ERASING........................................................27
  145.           HORIZONTAL SPACING.............................................28
  146.  
  147.           4   OTHER MARKINGS.............................................29
  148.           TIES...........................................................29
  149.           SLURS..........................................................29
  150.           TUPLETS........................................................30
  151.           SYMBOLS........................................................31
  152.  
  153.  
  154.                              MusicEase  -  Contents  ii
  155.  
  156.  
  157.           FONTS..........................................................32
  158.           FOREIGN CHARACTERS.............................................33
  159.           DYNAMICS.......................................................33
  160.           LYRICS.........................................................34
  161.           CHORDS.........................................................35
  162.           INSTRUMENT NAMES...............................................36
  163.           GENERAL TEXT...................................................36
  164.           REPEATED MEASURES..............................................37
  165.           REPEATED BEATS.................................................37
  166.           MULTIPLE MEASURE RESTS.........................................37
  167.           MEASURE NUMBERS................................................37
  168.           WEDGES.........................................................37
  169.           ARPEGGIOS......................................................38
  170.           ENDINGS........................................................38
  171.           OVERLAYS.......................................................38
  172.  
  173.           5   FINER CONTROL..............................................40
  174.           FORCING ACCIDENTALS TO DISPLAY.................................40
  175.           BEAMS..........................................................40
  176.           DEFINING THE BEAMING PATTERN...................................40
  177.           DEFINING THE SCOPE OF A BEAM...................................40
  178.           FLIPPING THE DIRECTION OF A BEAM...............................41
  179.           BEAM SLANT.....................................................41
  180.           STEMS..........................................................41
  181.           INITIAL BARLINE................................................42
  182.           BARLINE SPACE..................................................42
  183.           SHIFTING NOTES AND RESTS.......................................42
  184.           INTERSTAFF SPACING.............................................42
  185.           STAFF LINES....................................................43
  186.           NAMING A STAFF.................................................43
  187.           MAKING SOME STAVES INVISIBLE...................................43
  188.           QUICKER SCREEN DISPLAYS........................................43
  189.           BOOKMARKS......................................................44
  190.           SEARCH.........................................................44
  191.           REPLACE........................................................44
  192.           TEMPO DESIGNATION..............................................44
  193.           TRUE WYSIWYG...................................................44
  194.  
  195.           6   TABLATURE..................................................46
  196.           SPECIFYING TABLATURE...........................................46
  197.           ENTERING TABLATURE.............................................46
  198.           TABLATURE OPTIONS..............................................47
  199.           SLIDES.........................................................47
  200.           NUANCES........................................................47
  201.           ADDING STANDARD NOTATION.......................................48
  202.  
  203.           7   STORING SCORES.............................................49
  204.           SAVING A SCORE.................................................49
  205.           LOADING A SCORE................................................49
  206.           MERGING A SCORE................................................51
  207.           DELETING A FILE................................................51
  208.           SAVING A SCORE AS A MIDI FILE..................................52
  209.           SAVING A SCORE AS A TIFF FILE..................................52
  210.  
  211.  
  212.                              MusicEase  -  Contents  iii
  213.  
  214.  
  215.           8   PRINTING...................................................53
  216.           SPECIFYING YOUR PRINTER........................................53
  217.           PRINTING A SCORE...............................................53
  218.           ENTERING THE TITLE.............................................54
  219.           ENTERING THE LYRICIST..........................................54
  220.           ENTERING THE COMPOSER..........................................55
  221.           PAGE LAYOUT....................................................55
  222.           REPAGINATION...................................................66
  223.           RUNNING HEADS..................................................56
  224.           JUSTIFICATION..................................................57
  225.           CAST OFF.......................................................57
  226.           STAFF LINE THICKNESS...........................................58
  227.  
  228.           9   SOUND AND MIDI.............................................59
  229.           YOUR COMPUTER'S OSCILLATOR.....................................59
  230.           MIDI PORT......................................................59
  231.           MIDI PLAYBACK..................................................59
  232.           MIDI STEP MODE NOTE ENTRY......................................59
  233.           MIDI REALTIME NOTE ENTRY.......................................60
  234.           MIDI FILES.....................................................61
  235.  
  236.           10   TRANSPOSING...............................................62
  237.           TRANSPOSING....................................................62
  238.           INVERTING......................................................62
  239.           RETROGRADING...................................................62
  240.           SHIFTING.......................................................62
  241.           ADDING.........................................................63
  242.           ERASING........................................................63
  243.           DIVIDING.......................................................63
  244.  
  245.           11   WINDOWS...................................................64
  246.           OPENING A NEW WINDOW PANE......................................64
  247.           CLOSING A WINDOW...............................................64
  248.           SPLITTING A WINDOW.............................................64
  249.  
  250.           12   SOME HINTS................................................65
  251.           SELECTING MENU ITEMS...........................................65
  252.           SPEED KEYS.....................................................65
  253.           LYRICS.........................................................65
  254.           SEVERAL CHORDS ON ONE NOTE.....................................65
  255.           CURSOR MOVEMENT................................................66
  256.           SPEEDING UP SCREEN REDISPLAYS..................................66
  257.           LONGER SCORES..................................................66
  258.           ERROR MESSAGES.................................................67
  259.  
  260.           APPENDIX 1  SPEED KEYS.........................................68
  261.  
  262.           APPENDIX 2  MUSICEASE PROFESSIONAL.............................74
  263.  
  264.  
  265.  
  266.                      MusicEase  -  Chapter 1:  INTRODUCTION / 0
  267.  
  268.  
  269.           What is MusicEase?
  270.           -----
  271.           MusicEase is a music score editor that lets you create, edit,
  272.           print and play music notation.
  273.  
  274.           MusicEase is a Shareware product for creating publication quality
  275.           music scores.  You are free to evaluate the product for a period of 
  276.           30 days.  If you find the program useful, and you continue to use 
  277.           it beyond the 30 day evaluation period, you are legally required 
  278.           to purchase a fully licensed copy.  
  279.           
  280.           The shareware/evaluation version of MusicEase is not restricted 
  281.           in any way during the evaluation period. However, the registration 
  282.           reminder screens will change after 30 days of unregistered usage, 
  283.           all printing functions will cease to operate after 90 days of 
  284.           unregistered usage, and the program will completely cease to 
  285.           operate after 120 days of unregistered usage.  
  286.           
  287.           Upon registering the product, you will receive:
  288.  
  289.           -  a fully licensed copy of the most current version available,
  290.  
  291.           -  a 25% discount on future upgrades and new releases,
  292.  
  293.           -  a printed manual including graphic images which cannot be
  294.              included in the on-disk manual,
  295.  
  296.           -  an extensive tutorial, contained in the printed manual,
  297.  
  298.           -  a disk containing samples of works created by MusicEase,
  299.  
  300.           -  a symbol definition utility,
  301.  
  302.           -  a symbol file containing many more symbols,
  303.  
  304.           -  unlimited support via mail, telephone, CompuServe, etc.,
  305.  
  306.           -  update notices for future versions,
  307.  
  308.           -  removal of the watermark on printed output,
  309.  
  310.           -  removal of registration reminder screens and time limits,
  311.  
  312.           -  welcome screen will include "Registered to: <YourName>".
  313.  
  314.           And apart from all that, the knowledge that you are helping to 
  315.           support the Shareware concept, a distribution system that brings 
  316.           you quality software at realistic prices.
  317.  
  318.  
  319.  
  320.                   MusicEase  -  Chapter 1:  INTRODUCTION / 1
  321.  
  322.           
  323.           MusicEase is a music score editor that lets you create, edit, print
  324.           and play music notation.
  325.           
  326.           In particular, MusicEase is a constraint-based system with a
  327.           large amount of knowledge of music notation.  This allows it to
  328.           handle intelligently many of the details of scoring automatically.
  329.           For instance, bar lines are inserted automatically according to 
  330.           the meter.  If you change the meter, the bar line placements 
  331.           change automatically.  (Of course you can insert barlines yourself 
  332.           wherever you like also.)  The result is that you can create 
  333.           professional looking scores easily and quickly.
  334.  
  335.           You can enter notes using the computer keyboard or you can enter
  336.           notes by playing them on a MIDI instrument.  You can also create
  337.           pieces using other music software such as a sequencer and, if
  338.           they have a MIDI file capability, these pieces can be loaded
  339.           directly into MusicEase.
  340.  
  341.           MusicEase also allows you to transpose, invert and retrograde
  342.           sections or entire pieces.
  343.  
  344.           Philosophy
  345.           -----
  346.           Since many of you are familiar with word processors, MusicEase is
  347.           designed to work much like a word processing program.  For
  348.           instance, once you are in editing mode (press the Escape key and
  349.           then the Enter key), pressing the G key enters the note G.
  350.           Pressing the Backspace key then deletes this note.  You press the
  351.           Enter key when you want to begin a new system.  Pressing the
  352.           Backspace key at the beginning of a system appends it to the
  353.           previous system.  Blocks can be cut from one location and pasted
  354.           into another location and then everything can be reformatted with
  355.           just several keystrokes.
  356.  
  357.           We have also tried to do everything we can to permit you to
  358.           specify your notation quickly.  In pursuit of this goal, we have
  359.           included a number of speed keys to minimize the number of
  360.           keystrokes necessary to issue commands.  This in conjunction with
  361.           MusicEase's constraint-based approach provide for very efficient
  362.           music score creation.
  363.  
  364.  
  365.                      MusicEase  -  Chapter 1:  INTRODUCTION / 2
  366.  
  367.  
  368.           In spite of the range of styles of music scores that MusicEase
  369.           can handle, ease of use has been a primary goal.  Reviewers have
  370.           consistently rated MusicEase in the highest category for ease of
  371.           use.
  372.  
  373.           Finally printed output has been made to correspond as closely as
  374.           possible to music printed by professional music engravers.  For
  375.           example, beam slants and end positions are correct according to
  376.           music engraving standards.  Note spacing after justification has
  377.           been applied also corresponds extremely closely to that of
  378.           professional engravers.
  379.  
  380.           In Short
  381.           -----
  382.           The design goal of MusicEase has been to provide you with as much
  383.           power in as simple and elegant a manner as possible.  Please
  384.           write or call with your comments and suggestions.  We are
  385.           committed to improving MusicEase and reshaping it in response to
  386.           your musical needs.
  387.  
  388.           Support Policy
  389.           -----
  390.           Users are entitled to full product support via mail or telephone
  391.           for a period of not less than 90 days.  Support may also be
  392.           obtained via Compuserve email.  If technical problems in the
  393.           software are discovered within 90 days of registration, RMH
  394.           Computer Services will, at their option, either provide a
  395.           workable solution to the problem or a refund of the registration
  396.           cost.  After the initial 90 days, RMH Computer Services is only
  397.           obligated to make reasonable effort to supply a revised copy of
  398.           the software.
  399.  
  400.           Support via mail is available at RMH Computer Services, PO Box
  401.           657, Beech Grove, IN 46107-0657 USA.  Telephone support is
  402.           available at 317-782-9903 between the hours of 08:00am - 06:00pm
  403.           EST.  Email support is also available via our BBS at 317-784-2147
  404.           24 hrs/day.  You may also direct email to Richard Holler via
  405.           CompuServe at 73567,1547, Internet: 73567.1547@compuserve.com,
  406.           FidoNet NetMail at 1:231/290, and RIME private/routed email at
  407.           ->5056.
  408.  
  409.           System Contents
  410.           -----
  411.           MusicEase consists of the MusicEase User Manual and the following
  412.           files on the MusicEase Diskette(s) (additional files may be
  413.           included):
  414.  
  415.           * README.TXT   Text file with information not included in 
  416.                          this manual
  417.  
  418.           * ME.EXE       MusicEase program file
  419.  
  420.           * MUSICEZ.INI  Initialization file
  421.  
  422.  
  423.                      MusicEase  -  Chapter 1:  INTRODUCTION / 3
  424.  
  425.  
  426.           * MUSICEZ.SYM  Symbol file
  427.  
  428.           * SYMBOL.EXE   Symbol defining utility
  429.  
  430.           * SYMBOL.INI   Symbol initialization file
  431.  
  432.           * HERCULES.COM Resident program for Hercules graphics cards
  433.  
  434.           * SYSSYMS.SYM  System symbol file with laser printer 
  435.                          definitions
  436.  
  437.           * INV13.MEZ    Sample file containing page of a Bach piano 
  438.                          invention
  439.  
  440.           System Requirements
  441.           -----
  442.           This section lists the minimum hardware and software required to
  443.           run MusicEase.
  444.  
  445.           * An IBM Personal Computer or compatible running PC-DOS or
  446.             Microsoft Corporation's MS-DOS operating system software,
  447.             version 2.0 or later.
  448.  
  449.           * A color graphics adapter (CGA), an enhanced graphics adapter
  450.             (EGA), a video graphics adapter (VGA), a Hercules graphics
  451.             adapter, or a compatible adapter installed in the computer.
  452.  
  453.           * A color monitor, an enhanced color monitor, or a multisync
  454.             color monitor.
  455.  
  456.           * A minimum of 640 kilobytes of computer memory.
  457.  
  458.           * At least one double sided (360K) 5 and 1/4 inch diskette or
  459.             one double sided (720K) 3 and 1/2 inch diskette drive.
  460.  
  461.           To use MusicEase's MIDI input or output facilities, the following
  462.           is required:
  463.  
  464.           * A Roland MPU-401 or compatible card.
  465.  
  466.  
  467.  
  468.           Making A Working Copy
  469.           -----
  470.           As a convenience to authorized users, the MusicEase diskette is
  471.           not copy protected.  It can be copied using standard DOS copying
  472.           commands.  In return, we ask that you abide by our copyright and
  473.           not distribute copies of the fully licensed software to 
  474.           unauthorized users.
  475.  
  476.           As a safeguard against the loss, damage, or erasure of the
  477.           MusicEase diskette(s), you should make a working copy of the
  478.           diskette(s) before using MusicEase.  If the working copy is made
  479.           on one or more diskettes, the diskettes must have labels bearing
  480.           the following copyright notice:
  481.  
  482.  
  483.                      MusicEase  -  Chapter 1:  INTRODUCTION / 4
  484.  
  485.  
  486.                          MusicEase
  487.                          Copyright 1991-95 by Gary Rader
  488.                          All Rights Reserved Worldwide
  489.  
  490.           In addition to the copyright notice, it is a good idea to put the
  491.           version number of MusicEase on the diskette label.  The version
  492.           number is displayed when MusicEase starts.
  493.  
  494.           Before making a working copy, we recommend write protecting the
  495.           original MusicEase diskette(s).  A 5-1/4 inch diskette is write 
  496.           protected by covering the notch on the right side of the diskette 
  497.           with a write-protect tab or scotch tape.  A 3-1/2 inch diskette 
  498.           is write protected by moving the write-protect slide so the window 
  499.           is open.  See your computer manuals for details.
  500.  
  501.           Hard Disk Procedure
  502.           -----
  503.           If your computer has a hard disk drive for drive C, simply insert
  504.           the MusicEase diskette in drive A and type
  505.  
  506.                                    A:INSTALL
  507.  
  508.           or insert it in drive B and type
  509.  
  510.                                    B:INSTALL
  511.  
  512.           To create a floppy disk based version from your hard drive
  513.           version, if you have 360K disks, copy ME.EXE and ME.INI onto one
  514.           disk and the remaining files onto a second disk.  For any other
  515.           disk capacity, simply copy all files from your hard disk onto a
  516.           single floppy.  Have the first disk in the current drive when you
  517.           start MusicEase and whenever you save the state.  Otherwise have
  518.           the second disk in the current drive.
  519.  
  520.           Diskette Procedure
  521.           -----
  522.           If your computer has one or two diskette drives but no hard disk
  523.           drive, you can make a working copy of MusicEase on a diskette
  524.           using the DISKCOPY command described in the DOS manual.
  525.  
  526.           Alternatively, if your computer has diskette drives for drives A
  527.           and B, you can make a working copy of MusicEase as follows:
  528.  
  529.           * Turn on and boot the computer in the ordinary way from a DOS
  530.             system diskette in drive A.
  531.  
  532.           * Insert a blank diskette in drive B.
  533.  
  534.           * Format the blank diskette by entering the DOS command
  535.  
  536.                                    FORMAT  B:
  537.  
  538.           * Insert the MusicEase diskette in drive A.
  539.  
  540.  
  541.                      MusicEase  -  Chapter 1:  INTRODUCTION / 5
  542.  
  543.  
  544.           * Copy the files from the MusicEase diskette to the blank
  545.             working diskette by entering the DOS command
  546.  
  547.                                    COPY  A:*.*  B:
  548.  
  549.           * After all the files have been transferred to the working
  550.             diskette and the DOS prompt is redisplayed, remove the
  551.             MusicEase diskette from drive A and store it in a safe, cool,
  552.             and dry place that is physically separated from the working
  553.             copy of MusicEase.
  554.  
  555.           * Remove the working diskette from drive B and place the
  556.             previously described copyright notice on it.
  557.  
  558.           * If you have two MusicEase diskettes, repeat the previous six
  559.             steps with the second diskette.
  560.  
  561.           Keyboard Notation
  562.           -----
  563.           Some keys on computer keyboards may be marked with descriptive
  564.           symbols instead of names that are spelled out.  Throughout this
  565.           manual these keys are referenced by names printed in bold
  566.           letters.  The following is an alphabetical list of the names and
  567.           the corresponding symbols used on many keyboards:
  568.  
  569.             Manual        Keyboard        Manual        Keyboard
  570.              Name                         Symbol          Name
  571.             Symbol
  572.  
  573.           ----------     ----------     ---------      ---------
  574.              Alt            Alt            Ins            Ins
  575.  
  576.           Backspace          -             Home           Home
  577.  
  578.              Ctrl           Ctrl           PgDn           PgDn
  579.  
  580.              Del            Del            PgUp           PgUp
  581.  
  582.              End            End           Shift             Y
  583.  
  584.             Enter            ?           Spacebar     <space bar>
  585.  
  586.              Esc            Esc            Tab
  587.  
  588.  
  589.  
  590.           Sometimes you need to press two keys at the same time to obtain
  591.           the desired effect.  For example, when the manual says Shift-Tab,
  592.           hold down the Shift key and press the Tab key.  Similarly, Ctrl-H
  593.           means hold down the Ctrl key and press the letter H, whereas
  594.           Alt-E means hold down the Alt key and press the letter E.
  595.  
  596.           When the manual says to "enter a command", it means to type the
  597.           command and then press the Enter key.
  598.  
  599.  
  600.                      MusicEase  -  Chapter 1:  INTRODUCTION / 6
  601.  
  602.  
  603.           Ascii codes 128 to 165 yield foreign characters from the PC-8
  604.           symbol set.  To enter such a character, hold the Alt key down
  605.           while entering the number code on the numeric keypad.  The
  606.           correspondence between characters and codes can usually be found
  607.           in your DOS manual or printer manual.
  608.  
  609.  
  610.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 7
  611.  
  612.  
  613.           2
  614.                     Fundamentals
  615.  
  616.  
  617.           This chapter explains the fundamentals of how to start MusicEase,
  618.           how to use its menu driven interface, how to execute DOS commands
  619.           from within MusicEase, how to change the colors, how to save the
  620.           current state, and how to quit MusicEase.  It is essential to
  621.           understand the information in this chapter to effectively use the
  622.           system.
  623.  
  624.           Starting MusicEase
  625.           -----
  626.           Once a working copy of the MusicEase diskette(s) has been made as
  627.           described in Chapter 1, it is a simple matter to start MusicEase
  628.           as follows:
  629.  
  630.           * Turn on and boot your computer in the ordinary way from either
  631.             a hard disk or a DOS system diskette in drive A.
  632.  
  633.           * If your working copy of MusicEase is on a diskette, insert the
  634.             diskette in drive A and enter the DOS command
  635.  
  636.                 A:ME (or A:MEPRO for Professional version)
  637.  
  638.             If MusicEase is on a DOS system diskette, you can boot your
  639.             computer and start MusicEase from the same diskette.
  640.  
  641.           * If your working copy of MusicEase is on a hard disk, enter the
  642.             DOS command
  643.  
  644.                 ME (or MEPRO for Professional version)
  645.  
  646.           If this does not start MusicEase, you will have to change to the
  647.           drive and directory containing the file ME.EXE or MEPRO.EXE before
  648.           executing the command.  For example, the command
  649.  
  650.                 CD  \ME
  651.  
  652.           changes to the ME subdirectory if one exists.  Once you have
  653.           changed to the correct drive and directory, you must reissue the
  654.           ME/MEPRO command to actually start MusicEase.
  655.  
  656.           Whichever method you use to start MusicEase, there is a short
  657.           delay while the program loads from the diskette or the hard disk.
  658.           When the loading is complete, the initial MusicEase screen
  659.           described in the next section is displayed.
  660.  
  661.           If you have a Hercules or compatible graphics card, you must
  662.           first run the program HERCULES.COM before you start MusicEase.
  663.           HERCULES.COM is a memory resident program supplied on your
  664.           MusicEase diskette(s).
  665.  
  666.  
  667.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 8
  668.  
  669.  
  670.           The initialization file for MusicEase is set for CGA displays.
  671.           If you are using something else, use the Options Display command
  672.           to select your display type and then issue a Transfer sAve-state
  673.           command to save this in the initialization file.
  674.  
  675.           To issue an Options Display command, first press the O key (for
  676.           Options) and then press the D key (for Display).  If Graphics is
  677.           not highlighted, press the Spacebar until it is.  Then press the
  678.           Tab key.  You should now be in the Resolution field.  If High is
  679.           not highlighted, press the Spacebar until it is.  Then press the
  680.           Tab key again.  You are now in the Adapter field and CGA should
  681.           be highlighted.  Press the Spacebar until your adapter type is
  682.           highlighted.  Now press the Enter key.
  683.  
  684.           To issue a Transfer sAve-state command, press the T key (for
  685.           Transfer) and then the A key (for sAve-state).  This saves an
  686.           initialization file MUSICEZ.INI in the current directory with the
  687.           new specification for your display type.  Now each time you run
  688.           MusicEase from this directory, the display will automatically be
  689.           set to conform with your selections in the Options Display
  690.           command.  If there is no initialization file in the current
  691.           directory, MusicEase looks at the directories in the DOS command
  692.           search path for such an initialization file and uses that if one
  693.           is found.
  694.  
  695.           The README.TXT file contains information not included in the manual.
  696.           You can either load it into your word processing program and then
  697.           print it out or you can dump it directly to your printer by
  698.           typing
  699.  
  700.               TYPE  README.TXT > LPT1:
  701.  
  702.           and pressing the Enter key.
  703.  
  704.           The MusicEase Screen
  705.           -----
  706.           When you start MusicEase, the initialization file will be loaded
  707.           first followed by the symbol file.  Then you will see the
  708.           MusicEase screen:
  709.  
  710.           The bottom two lines of the MusicEase screen are called the
  711.           status lines.  They display the current status of MusicEase.
  712.           Initially they show
  713.  
  714.           * the file currently being edited has no name,
  715.  
  716.           * the page number of the staff containing the cursor is one,
  717.  
  718.           * the number of the staff containing the cursor on the current
  719.             page is one,
  720.  
  721.           * the number of the measure containing the cursor on the current
  722.             staff is one,
  723.  
  724.  
  725.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 9
  726.  
  727.  
  728.           * the line editor is in insert mode rather than overwrite mode
  729.             (line editing is discussed in the following section),
  730.  
  731.           * the percentage of computer memory space available to store
  732.             music score (this percentage does not change each time
  733.             something is added or removed since it is updated only
  734.             periodically when MusicEase finds it necessary to recycle
  735.             memory),
  736.  
  737.           * that the product name is MusicEase,
  738.  
  739.           * the current duration note is a quarter note (this is the
  740.             duration that notes and rests will have when added at this
  741.             point),
  742.  
  743.           * the current notehead type is the standard musical notehead
  744.             (this is the notehead type that notes will have when added at
  745.             this point),
  746.  
  747.           * the current voice is one,
  748.  
  749.           * notes and rests will be inserted at the cursor as opposed to
  750.             being replaced, added to (to create chords) or deleted from
  751.             chords,
  752.  
  753.           * there is no vertical shifting of the pitches which correspond
  754.             to the computer keyboard keys for entering pitches (right now
  755.             pressing Alt-C would insert a middle C, lower case c would
  756.             insert the C an octave above and upper case C would insert the
  757.             C two octaves above middle C --- this correspondence can be
  758.             shifted up to two octaves up or down),
  759.  
  760.           * the current key at the cursor is C,
  761.  
  762.           * the current meter at the cursor is 4/4,
  763.  
  764.           * and that there is no instrument name for the staff   containing
  765.             the cursor.
  766.  
  767.           Immediately above the status lines is the message line.  It
  768.           displays what MusicEase is doing or what you are expected to do
  769.           next.  Initially, this line displays the message  Enter option,
  770.           meaning that you are expected to select a command from the menu
  771.           of options.  (Or you press A to enter edit mode and begin
  772.           entering or editing music score.)
  773.  
  774.           The two lines above the message line are the top-level command
  775.           menu.  The word COMMAND is the command menu title.  The words
  776.           following it on the same and following line are the command menu
  777.           options.
  778.  
  779.           Using the Menu System
  780.           -----
  781.  
  782.  
  783.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 10
  784.  
  785.  
  786.           When MusicEase first comes up, you are in menu mode.  Pressing
  787.           the A key (for Alpha) or, in this case, just the Enter key since
  788.           Alpha is initially highlighted, puts you in edit mode and moves
  789.           the cursor up to the staff at the top of your screen.  Pressing
  790.           the Esc key returns you to menu mode.
  791.  
  792.           One of the menu options is highlighted in reverse video.  Each
  793.           time you press the Spacebar at the bottom of the keyboard or the
  794.           Tab key, the highlight moves to the next option.  Each time you
  795.           press Backspace or Shift-Tab, the highlight moves to the previous
  796.           option.  To issue a command, first highlight the desired menu
  797.           option and then press the Enter key.
  798.  
  799.           If you are familiar with the keyboard, a faster way to issue a
  800.           command is to type the capitalized letter in the menu option.
  801.           This is the first capitalized letter of the option unless there
  802.           is another option having the same capitalized letter.  It does
  803.           not matter whether you type the letter in upper or lower case.
  804.  
  805.           Many commands invoke sub-command menus, which may in turn invoke
  806.           sub-sub-command menus, etc.  For brevity, this manual refers to a
  807.           sequence of commands entered from successive menus by
  808.           concatenating the menu option names.  For example, this manual
  809.           uses the phrase "issue the Options Display command" instead of
  810.           the phrase "issue the Options command and then issue the Display
  811.           sub-command".
  812.  
  813.           After looking at a sub-command menu, you can return to the top-
  814.           level command menu by pressing the Esc key.  Esc is also used to
  815.           abort computations that are taking too long.
  816.  
  817.           Some menu option commands display one or more selection fields,
  818.           each with its own name, followed by a colon and a list of two or
  819.           more selections.  For example, if you issue the Options Display
  820.           command, it displays
  821.  
  822.           DISPLAY:  Mode:  Text Graphics     Resolution: Medium (High)
  823.                Adapter:  MDA (CGA) EGA MCGA VGA Hercules AT&T
  824.  
  825.           These lines consist of three selection fields: Mode, Resolution,
  826.           and Adapter.  Initially, the current display mode (either Text or
  827.           Graphics) is highlighted.  The highlight indicates that the mode
  828.           field is the active selection field.  The current selections in
  829.           the other fields are parenthesized.  The parentheses indicate
  830.           that these fields are inactive.
  831.  
  832.           Press the Tab key to move the active field right.  Press Shift-
  833.           Tab to move the active field left.  (Chapter 1 describes how to
  834.           type shift keys such as Shift-Tab.)  To make a selection, press
  835.           Spacebar or Backspace to highlight the desired selection or type
  836.           the first capitalized letter in the selection's name.  The latter
  837.           method of making a selection also moves the active field right.
  838.           Press Enter to invoke your selections.  Alternatively press Esc
  839.           to abort the command without making any changes.
  840.  
  841.  
  842.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 11
  843.  
  844.  
  845.           Some menu option commands display one or more data entry fields,
  846.           each with its own name, followed by a colon.  Some commands
  847.           display both selection and data entry fields.  Tab makes the next
  848.           field be the active field while Shift-tab makes the previous
  849.           field active.
  850.  
  851.           If you press a key for which there is no command, MusicEase
  852.           produces a short error beep.  If you find the beep annoying, use
  853.           the Options Mute command to turn it off.
  854.  
  855.           Now is a good time to start MusicEase if you have not already
  856.           done so.  You will probably find it easiest to learn by
  857.           interactive participation while reading this manual.
  858.           Alternatively, you may want to skim through the manual once to
  859.           get an overview of MusicEase before starting to use the system.
  860.  
  861.           Line Editing
  862.           -----
  863.           Often while using MusicEase, you will need to enter or edit a
  864.           line of text.  For example, try issuing a Transfer Save command
  865.           by pressing Enter when the Transfer menu option is highlighted
  866.           and then pressing Enter when the Save menu option is highlighted.
  867.           A blinking cursor should appear and the system will wait for you
  868.           to type a line of text.
  869.  
  870.           Try typing your whole name on the line, but do not press Enter.
  871.           If you make a mistake, press Backspace or Ctrl-H to delete the
  872.           mistake and then type the correction.  (Chapter 1 describes how
  873.           to type control keys such as Ctrl-H.)  Try deleting the last few
  874.           characters of your name and then retyping them.
  875.  
  876.           To make a change near the beginning of the line without deleting
  877.           the characters at the end, use Ctrl-S to move the cursor to the
  878.           left without erasing characters.  If you move the cursor too far
  879.           to the left, use Ctrl-D to move the cursor to the right.
  880.  
  881.           A token is a string of letters or numeric characters terminated
  882.           by a space, by the end of the line, or by some other type of
  883.           character.  Use Ctrl-A to move the cursor left a token or Ctrl-F
  884.           to move it right a token.  Use Ctrl-Q S to move to the left end
  885.           of the line (i.e., press Ctrl-Q and then press S).  Use Ctrl-Q D
  886.           to move to the right end of the line.
  887.  
  888.           Use Ctrl-U or F3 to insert the previously entered line of text at
  889.           the cursor.
  890.  
  891.           If the cursor is within a sequence of characters, use Del or
  892.           Ctrl-G to delete the character at the cursor.  Use Ctrl-T to
  893.           delete the token at and to the right of the cursor.  If you have
  894.           so muddled the line you are editing that you would like a fresh
  895.           start, use Ctrl-Y to delete the whole line.  Use Ctrl-Q Y to
  896.           delete the right end of the line beginning with the character at
  897.           the cursor.  Use Ctrl-Q Backspace or Ctrl-Q H to delete the left
  898.           end of the line.
  899.  
  900.  
  901.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 12
  902.  
  903.  
  904.           The effect of typing characters when the cursor is positioned
  905.           within a text edit line depends on the current entry mode.  In
  906.           insert mode, characters under and to the right of the cursor are
  907.           moved right to make room for a new character.  In overwrite mode,
  908.           the character under the cursor is replaced by a new character.
  909.  
  910.           In insert mode, the word Insert appears on the top status line.
  911.           This word is absent from the status line in overwrite mode.  The
  912.           cursor is also slightly taller in insert mode than in overwrite
  913.           mode.
  914.  
  915.           You can toggle between the two entry modes by pressing Ins or
  916.           Ctrl-V.  Try toggling between modes and typing digits in both
  917.           modes.
  918.  
  919.           Press Esc to escape from the Transfer Save command and return to
  920.           the top-level command menu.
  921.  
  922.           Cursor keys can also be used for moving the cursor while in a
  923.           text edit line.
  924.  
  925.           Quitting MusicEase
  926.           -----
  927.           Use the Quit command to terminate MusicEase and return control to
  928.           DOS.  To issue this command, press Spacebar to highlight the Quit
  929.           menu option and press Enter, or simply type the letter Q.  If you
  930.           have made any changes to your score, before quitting, MusicEase
  931.           waits for you to respond to the message
  932.  
  933.                               Abandon edited music (Y/N)?
  934.  
  935.           If you type the letter Y for yes, MusicEase is terminated and the
  936.           DOS prompt is displayed.  Otherwise, the program continues as
  937.           before.
  938.  
  939.           Executing DOS Commands
  940.           -----
  941.           This and the remaining sections of Chapter 2 can be skipped until
  942.           they are actually needed.
  943.  
  944.           Use the Options Execute command to execute a DOS command while
  945.           running MusicEase.  It displays the current DOS drive and
  946.           directory followed by the  >  prompt character.  If you type a
  947.           DOS command and press Enter, the command is executed just as if
  948.           it were entered following the DOS prompt.  For example, the
  949.           command  DIR  displays the files in the current DOS directory.
  950.           After the command is executed, press any key to return to the
  951.           top-level command menu.
  952.  
  953.           If you want to execute several DOS commands, issue the Options
  954.           Execute command, then press Enter without typing any text.
  955.           MusicEase is temporarily suspended so you can execute any number
  956.           of DOS commands.  When you want to return to MusicEase, enter the
  957.           DOS command
  958.  
  959.  
  960.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 13
  961.  
  962.  
  963.                                         EXIT
  964.  
  965.           When MusicEase is suspended it still occupies some computer
  966.           memory while the DOS commands are being executed.  Thus DOS
  967.           commands that require a large amount of memory (such as MusicEase
  968.           itself) should not be executed during the suspension.  Before
  969.           executing such commands, use the Quit command to terminate
  970.           MusicEase.
  971.  
  972.           Warning:  Do not use the Options Execute command to load memory
  973.           resident programs such as HERCULES.COM.  Doing so will abruptly
  974.           terminate MusicEase.
  975.  
  976.           The file COMMAND.COM must be located in order for the Options
  977.           Execute command to execute a DOS command.  If the file cannot be
  978.           located, the command displays the warning message
  979.  
  980.                               Cannot find COMMAND.COM.
  981.  
  982.           Changing Screen Colors
  983.           -----
  984.           You can change the colors of the music and its background using
  985.           the Options Color Work command and the colors of the menu lines,
  986.           border lines, message line and status lines using the Options
  987.           Color Menu command.  Once you have done this, save the state
  988.           using the command described in the following section.  Then
  989.           whenever you invoke MusicEase, it will come up with these color
  990.           settings.
  991.  
  992.           Saving the Current State
  993.           -----
  994.           As described in this and subsequent chapters, there are many
  995.           system control settings in MusicEase that you can change.  They
  996.           include:
  997.  
  998.           * the print page layout and other print options,
  999.  
  1000.           * the display mode,
  1001.  
  1002.           * the foreground and background colors,
  1003.  
  1004.           * default fonts,
  1005.  
  1006.           * MIDI values,
  1007.  
  1008.           * and display variable values.
  1009.  
  1010.           Collectively called the current state of MusicEase, these
  1011.           settings can be saved as an INI file (initialization file).
  1012.  
  1013.           Use the Transfer sAve-state command to save the current state in
  1014.           the file MUSICEZ.INI.  When MusicEase starts, it automatically
  1015.           loads the state initialization file MUSICEZ.INI if there is such
  1016.           a file in the current directory or if it is in a directory on the
  1017.  
  1018.  
  1019.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 14
  1020.  
  1021.  
  1022.           DOS command search path.  The directories in the search path can
  1023.           be ascertained by issuing a PATH command at the DOS prompt (see
  1024.           your DOS manual for details).
  1025.  
  1026.           When you first start MusicEase, the initialization file is set
  1027.           for a CGA display.  If you want something else, use the Options
  1028.           Display command to select your display type.  Your screen should
  1029.           change to the new display type.  Then use the Transfer sAve-state
  1030.           command to save this new specification so it is automatically
  1031.           loaded in the future when you start MusicEase.
  1032.  
  1033.           If you want a particular state each time you start MusicEase, use
  1034.           the various state setting commands (e.g., Options Display,
  1035.           Options Color, Options Font, Print Options, Print Layout Page,
  1036.           Print Layout Options, and View Options) to set the desired
  1037.           initial state.  Then save the state.
  1038.  
  1039.           Terminology
  1040.           -----
  1041.           In order to make clear exactly what we're talking about when
  1042.           describing the various features of MusicEase, we first define the
  1043.           following terms:
  1044.  
  1045.           Current voice       The current voice is either 1 (the upper 
  1046.                               voice) or 2 (the lower voice).  The blinking 
  1047.                               cursor appears high on the staff if you are 
  1048.                               currently editing voice 1 and low on the 
  1049.                               staff for voice 2.
  1050.  
  1051.           Current page        The page on which the cursor lies.
  1052.  
  1053.           Current system      The system on which the cursor lies.
  1054.  
  1055.           Current staff       The staff on which the cursor lies.
  1056.  
  1057.           Current note        The note or chord or rest in the current 
  1058.                               voice on the current staff vertically aligned
  1059.                               with the cursor.  If the cursor lies at the 
  1060.                               right end of a staff, there is technically no
  1061.                               current note.  However we will often speak as
  1062.                               if there is one there and call it the end of 
  1063.                               the staff.
  1064.  
  1065.           Current key         The key in effect at the current note.
  1066.  
  1067.           Current clef        The clef in effect at the current note.
  1068.  
  1069.           Current meter       The meter in effect at the current note.
  1070.  
  1071.           Current window      The scoring window which contains the cursor.
  1072.                               Generally you have only one of these visible 
  1073.                               at a time unless you use the Window Split 
  1074.                               command.)
  1075.  
  1076.  
  1077.                      MusicEase  -  Chapter 2:  FUNDAMENTALS / 15
  1078.  
  1079.  
  1080.           Current notehead shape   The shape of the notehead used when 
  1081.                               notes are entered.  The value of this shape 
  1082.                               is displayed on the right side of the status 
  1083.                               lines.  It can, of course, be changed at any 
  1084.                               time.
  1085.  
  1086.           Current duration    The duration used when notes are entered.  
  1087.                               The value of this note is displayed on the 
  1088.                               right side of the status lines.  It can be 
  1089.                               changed at any time.
  1090.  
  1091.           Block               A region of the score.  You define the start 
  1092.                               of the block by pressing Ctrl-K B and the end
  1093.                               of the block by pressing Ctrl-K K.  Many 
  1094.                               commands can be restricted so they apply only
  1095.                               to the block.
  1096.  
  1097.           Often when we use the term note in the following, we mean either
  1098.           a single note, a chord or a rest.
  1099.  
  1100.  
  1101.                     MusicEase  -  Chapter 3:  BASIC EDITING / 16
  1102.  
  1103.  
  1104.           3
  1105.                     Basic Editing
  1106.  
  1107.  
  1108.           As you enter a piece, occasionally the screen will not accurately
  1109.           reflect the music.  For instance when you enter eighth notes.
  1110.           After entering the first eighth note, it is displayed with a
  1111.           flag.  When the second eighth note is entered, instead of erasing
  1112.           the first and displaying both with a beam, MusicEase just
  1113.           displays the second with a flag.  This speeds things up a lot as
  1114.           the first does not have to be erased and redisplayed.  When these
  1115.           notes are redisplayed later or printed, they will be beamed.
  1116.           Similarly for ties, slurs, and wedges which are only displayed
  1117.           when the note on which they start is displayed.  So the point is,
  1118.           if something looks wrong to you on the screen and you are
  1119.           uncomfortable with it, redisplay the staff using the speed key
  1120.           Alt-O or the system using Ctrl-O or the whole window using just
  1121.           capital O.  Or set true-view to "yes" (see View Options true-View
  1122.           command) in which case everything will always be displayed
  1123.           accurately but more slowly.
  1124.  
  1125.           Setting the Meter
  1126.           -----
  1127.           The meter can be set by using the command Insert Meter.
  1128.           Initially the current meter is displayed.  To specify a new
  1129.           meter, enter two numbers separated by a slash.  The first number
  1130.           can be any integer from 1 to 100.  The second number can be from
  1131.           a whole note to a 64th note.  To specify common meter, enter
  1132.           COMMON and for cut time, enter CUT.  Enter NONE if you don't want
  1133.           any meter.  The new meter appears in front of the current note,
  1134.           replacing any other meter which might be there.
  1135.  
  1136.           A meter change extends up to the next meter change or the end of
  1137.           the current staff, whichever comes first.  You should only
  1138.           specify a meter change at the beginning of a measure.  Changing
  1139.           the meter automatically changes the locations of barlines on the
  1140.           current staff.
  1141.  
  1142.           You can make the meter invisible by selecting Yes for the second
  1143.           field.  This is useful when a piece has been split across several
  1144.           files and the first system in the file being edited is not really
  1145.           the first system in the score and also when you have a repeat to
  1146.           the middle of a measure.
  1147.  
  1148.           When editing, you can access the Insert Meter menu directly by
  1149.           pressing m.
  1150.  
  1151.           Setting the Clef
  1152.           -----
  1153.           The clef can be set by using the command Insert Clef.  You can
  1154.           select either Treble, Bass, Alto or Tenor.  The new clef appears
  1155.           in front of the current note, replacing any other clef sign which
  1156.           might be there.
  1157.  
  1158.  
  1159.                     MusicEase  -  Chapter 3:  BASIC EDITING / 17
  1160.  
  1161.  
  1162.           A clef change extends up to the next clef change or the end of
  1163.           the current staff, whichever comes first.  Notes on the current
  1164.           staff following the new clef will be moved to conform to the new
  1165.           clef specification.
  1166.  
  1167.           When editing, you can access the Insert Clef menu directly by
  1168.           pressing L.
  1169.  
  1170.           To obtain a clef with a transposition indication (with a small
  1171.           numeral above or below the clef sign, first enter the desired
  1172.           clef as specified above.  Then use the View Heading command to
  1173.           add the numeral.  Choose either 4 or 5 for the font (italics or
  1174.           bold-italics) and select "Yes" as the value of the Repeat field
  1175.           so it is repeated on following staves/systems.  You must shift
  1176.           this numeral appropriately.  Suitable values are
  1177.  
  1178.           * for above the treble clef: vertical shift of -22 and
  1179.             horizontal shift of 39,
  1180.  
  1181.           * for below the treble clef: vertical shift of 23 and  horizontal
  1182.             shift of 32,
  1183.  
  1184.           * for above the bass clef: vertical shift -15 and horizontal
  1185.             shift of 30, and
  1186.  
  1187.           * for below the bass clef: vertical shift of 15 and horizontal
  1188.             shift of 30.
  1189.  
  1190.           MusicEase does not take this numeral into account when
  1191.           calculating the vertical spacing between staves.  Occasionally
  1192.           this numeral may be partially erased by the screen redisplay
  1193.           function but it is still there.  Occasionally you may have to
  1194.           increase the spacing between staves using the View StaFf command
  1195.           so it does not overlap the treble clef in a following staff.
  1196.  
  1197.           You can make the first clef of the current staff invisible using
  1198.           View Clef.
  1199.  
  1200.           Setting the Key Signature
  1201.           -----
  1202.           You can set the key signature by the command Insert Key.  You can
  1203.           select any key from 7 sharps to 7 flats.  You can also select
  1204.           whether you wish the previous key to be canceled with natural
  1205.           signs.  The new key appears in front of the current note.  You
  1206.           should only insert a new key at the beginning of a measure.
  1207.  
  1208.           A key change extends up to the next key change or the end of the
  1209.           current staff, whichever comes first.  Notes following the new
  1210.           key are redisplayed as they appear in the new key.
  1211.  
  1212.           When editing, you can access the Insert Key menu directly by
  1213.           pressing k.
  1214.  
  1215.  
  1216.                     MusicEase  -  Chapter 3:  BASIC EDITING / 18
  1217.  
  1218.  
  1219.           Inserting a Barline
  1220.           -----
  1221.           Normally MusicEase inserts barlines automatically in the right
  1222.           places according to the meter.  However there are times when you
  1223.           are beginning a staff with a partial measure or you need to
  1224.           insert a double barline or some other sort of barline.  To do
  1225.           this, use the Insert Bar command.  You can select from 6
  1226.           different barlines.  The new barline is inserted in front of the
  1227.           current note, replacing any barline that might already be there.
  1228.           MusicEase then adjusts the location of any following barlines on
  1229.           the current staff except for any that have been inserted manually
  1230.           by the user.
  1231.  
  1232.           When editing, access Insert Bar directly by pressing  |
  1233.           (vertical bar).
  1234.  
  1235.           Creating a New Staff
  1236.           -----
  1237.           To create a new staff, press Ctrl-Enter.  This breaks the current
  1238.           staff at the current note and starts a new staff immediately
  1239.           after it.  All notes from the current note to the end of the
  1240.           current staff are moved to the new staff.  The meter, key and
  1241.           clef at the beginning of the new staff are taken from the current
  1242.           meter, current key and current clef.  The current note remains
  1243.           unchanged but now is positioned at the beginning of the new
  1244.           staff.
  1245.  
  1246.           To reverse this operation and append two staves, press
  1247.           Ctrl-Backspace or Ctrl-_ (control underscore) while the cursor is
  1248.           at the beginning of the second staff.  Or, if the staves are not
  1249.           connected (i.e., they are one staff systems), you can just press
  1250.           Backspace (see the following section).
  1251.  
  1252.           Creating a System
  1253.           -----
  1254.           To create a system, first create the staves you want in the
  1255.           system. (How to do this is defined in the previous section.)  If
  1256.           there are too many staves to fit on the screen all at one time,
  1257.           the screen will scroll up so that the current staff is always
  1258.           visible.  Or use the Zoom command to see more on screen at once.
  1259.           Make sure you have the desired clefs and keys specified.
  1260.  
  1261.           Now press - until the cursor is on the staff you want to be the
  1262.           first one in the system.  Issue the View Connect command.  (You
  1263.           can reach this menu quickly by pressing lower case o.)  Select if
  1264.           the current and the following staves are to be connected at the
  1265.           first barline, at all interior barlines, and/or at the last
  1266.           barline.  Also if you want a bracket and/or a brace to begin at
  1267.           the current staff, enter the number of staves the bracket is to
  1268.           extend and/or the number of staves the brace is to extend.
  1269.  
  1270.           When back in edit mode and until you have incorporated all the
  1271.           staves you want into the system, press - to make the next staff
  1272.           the current staff and repeat the above process.
  1273.  
  1274.  
  1275.                     MusicEase  -  Chapter 3:  BASIC EDITING / 19
  1276.  
  1277.  
  1278.           Once you have created a system, pressing Enter will break the
  1279.           current system vertically just to the left of the current note
  1280.           and create a new system just after the current system.
  1281.  
  1282.           To reverse this operation and append two systems, press the
  1283.           Backspace key while the cursor is at the beginning of a staff.
  1284.  
  1285.           Setting the Current Notehead Shape
  1286.           -----
  1287.           The current notehead shape can be set to normal, "X" or diamond.
  1288.           The X is sometimes used for things like spoken text or certain
  1289.           types of percussion.  Diamonds can be used to indicate harmonics.
  1290.           Initially its value is normal.  Alt-X changes to the next value.
  1291.           The current notehead shape is displayed at the right end of the
  1292.           status lines.
  1293.  
  1294.           Entering Notes
  1295.           -----
  1296.           The keys a, b, c, d, e, f and g enter notes with the
  1297.           corresponding pitches near the center of the current staff.
  1298.           Upper case letters enter notes an octave higher.  Alt letters
  1299.           (Alt-A, Alt-B, etc.) enter notes an octave lower.
  1300.  
  1301.           To enter a sharped note, precede it by pressing the # key.  For
  1302.           example, to enter G#, first press # and then press g.  To enter a
  1303.           naturaled note, precede it by pressing the $ key.  To enter a
  1304.           flatted note, precede it by pressing the % key.  To enter a
  1305.           doubly sharped note, precede it by pressing Alt-#.  To enter a
  1306.           doubly flatted note, precede it by pressing Alt-%.
  1307.  
  1308.           Because of the way MusicEase is optimized for efficient screen
  1309.           displaying, some accidental signs may not appear correctly
  1310.           immediately after being entered.  If you are in doubt and want to
  1311.           see things as they really are, issue the reDisplay command.  Or
  1312.           pressing upper case O will redisplay the current window, Ctrl-O
  1313.           will redisplay the current system and Alt-O will redisplay just
  1314.           the current staff.
  1315.  
  1316.           Notes are entered with a duration equal to the current duration.
  1317.           Several sections after this section we describe how to change the
  1318.           current duration.
  1319.  
  1320.           You can shift the entire note entering scheme up or down either 1
  1321.           or 2 octaves using the Options Key-shift command.  To quickly
  1322.           shift it 2 octaves up while editing, press upper case U.  To
  1323.           shift it down 2 octaves, press Alt-U.  Pressing lower case u
  1324.           returns it to normal.
  1325.  
  1326.           Notes are only entered when you are in edit mode.  You get into
  1327.           edit mode by invoking the Alpha command.  Pressing Escape returns
  1328.           you to menu mode.  Pressing Escape followed by pressing Enter
  1329.           generally insures that you are in edit mode.
  1330.  
  1331.  
  1332.                     MusicEase  -  Chapter 3:  BASIC EDITING / 20
  1333.  
  1334.  
  1335.           When notes are entered, they are entered with a default
  1336.           horizontal width directly proportional to the notes' durations.
  1337.           Thus a quarter note will take up the same amount of horizontal
  1338.           space as two eighth notes.  This is because the proper horizontal
  1339.           spacing for a staff cannot be determined until all the notes have
  1340.           been entered for it and any other staves in the system along with
  1341.           any lyrics, clef changes and so forth.  The Justify command is
  1342.           used to create this proper horizontal spacing.  As you enter
  1343.           notes on unjustified staves within a system, notes that sound
  1344.           simultaneously will line up vertically as you would expect.  Only
  1345.           when you have entered all notes and lyrics for a system should
  1346.           you justify it.  Then the spacing for notes will be set so they
  1347.           line up properly vertically and the staff/system extends from the
  1348.           left to the right margin.
  1349.  
  1350.           If the system extends past the right margin, you have several
  1351.           options.  You can change the margins, reduce the printout size if
  1352.           you will be printing on a laser or inkjet printer, or make the
  1353.           system shorter by breaking it up.  This last option can be done
  1354.           manually or by using the cast-off command.
  1355.  
  1356.           If you enter notes on a staff which has already been justified,
  1357.           say, for example, in the opposite voice, the notes will not line
  1358.           up correctly vertically.  This is because the old notes have
  1359.           their justified spacing while the new notes do not.  To remedy
  1360.           this, use the Justify command to unjustify the system (select
  1361.           "Unjustify" for the value of the Operation field), add the new
  1362.           notes, then justify the system (select "Justify" for the
  1363.           Operation field..
  1364.  
  1365.           When lyrics are entered on an unjustified staff, some words may
  1366.           overlap.  Justification will cure this problem as it takes lyric
  1367.           widths into account when calculating the note spacing.
  1368.           Similarly, accidentals or even notes themselves if they are short
  1369.           may overlap.  Again this condition is corrected by justification.
  1370.  
  1371.           The speed key to justify the current system is 7, Alt-7 will
  1372.           unjustify it.
  1373.  
  1374.           Entering Rests
  1375.           -----
  1376.           You can enter a rest by pressing lower case r.  Rests are entered
  1377.           with a duration equal to the current duration.  The next section
  1378.           describes how to change the current duration.  To enter a rest
  1379.           positioned high on the current staff, press R.  To enter a rest
  1380.           positioned low on the current staff, press Alt-R.
  1381.  
  1382.           To enter a whole note rest which fills the measure no matter what
  1383.           the meter is, use w, W and Alt-W instead of r, R and Alt-R.
  1384.  
  1385.           You can further refine the placement of rests by issuing a View
  1386.           Shift Rest command.
  1387.  
  1388.           Setting the Current Duration
  1389.  
  1390.  
  1391.                     MusicEase  -  Chapter 3:  BASIC EDITING / 21
  1392.  
  1393.  
  1394.           When notes are entered, their duration equals the current
  1395.           duration.  To set the current duration, press a digit key.  New
  1396.           settings result as follows:
  1397.  
  1398.                          1    =    whole note
  1399.  
  1400.                          2    =    half note
  1401.  
  1402.                          3    =    32nd note
  1403.  
  1404.                          4    =    quarter note
  1405.  
  1406.                          6    =    64th note
  1407.  
  1408.                          8    =    8th note
  1409.  
  1410.                          9    =    16th note
  1411.  
  1412.           Preceding the digit by pressing the period key yields a dotted
  1413.           duration.  Pressing the period key twice yields a doubly dotted
  1414.           duration.  The current duration is displayed as a small note in
  1415.           the bottom right corner of the screen.
  1416.  
  1417.           Changing Voices
  1418.           -----
  1419.           Pressing lower case v toggles the voice being entered.  For
  1420.           instance, if the current voice is 1, pressing v makes the current
  1421.           voice 2.  The cursor sits high on the staff when the current
  1422.           voice is 1 and low on the staff when the current voice is 2.  The
  1423.           bottom status line also displays the current voice.  When there
  1424.           are two voices on a staff, the stems of voice 1 notes are up
  1425.           while the stems of voice 2 notes are down.  Use voice 1 for
  1426.           staves with only one voice.
  1427.  
  1428.           When changing voices, MusicEase tries to keep the cursor as close
  1429.           as possible to the same horizontal position.  How well it can do
  1430.           this of course depends on the durations of the notes on the
  1431.           current staff to the left of it.  If there are no notes yet
  1432.           entered in the new voice, the cursor will move to the beginning
  1433.           of the staff.  If the staff has been justified (see the Justify
  1434.           command), newly added notes will not line up vertically with old
  1435.           notes.  To see how notes really line up vertically, use the
  1436.           Justify System command (and set the Operation field to
  1437.           "Unjustify") to unjustify the system.  When finished adding
  1438.           notes, rejustify the system (remember to set the Operation field
  1439.           back to "Justify").
  1440.  
  1441.           Deleting Notes
  1442.           -----
  1443.           You can delete the current note by pressing the Del key or Ctrl-
  1444.           G.  If the current note is not the first note on the current
  1445.           staff, pressing Backspace  or Ctrl-H deletes the previous note.
  1446.           If the current note is the first note, Backspace or Ctrl-H
  1447.           appends the current system to the previous system.
  1448.  
  1449.  
  1450.                     MusicEase  -  Chapter 3:  BASIC EDITING / 22
  1451.  
  1452.  
  1453.           You can also delete several notes at a time.  Ctrl-T deletes all
  1454.           notes from the current note through the last note in the current
  1455.           measure.  Ctrl-Q T deletes from the first note in the current
  1456.           measure up to but not including the current note.  Alt-Y deletes
  1457.           the current staff.
  1458.  
  1459.           The command Transfer Clear deletes all notes in the current
  1460.           window and leaves only the single starting staff.
  1461.  
  1462.           Pressing Ctrl-K Y deletes the block.
  1463.  
  1464.           Creating Chords
  1465.           -----
  1466.           Pressing the + (plus) key allows you to create chords.  After
  1467.           doing this, each time you enter a note, it will be added to the
  1468.           current note (chord).  To move to the next note, press R.  Press
  1469.           n to return to insert mode.
  1470.  
  1471.           Notice that all notes in a chord have the same duration.  You can
  1472.           press Alt-O to redisplay the current staff if you like.
  1473.  
  1474.           You can selectively delete notes from a chord by first pressing
  1475.           the - (minus) key.  Notes are then deleted from the chord.
  1476.           Pressing the n key returns to insert mode.  The current mode is
  1477.           displayed on the bottom status line.
  1478.  
  1479.           Replacing Notes
  1480.           -----
  1481.           You can replace the current note with another note by entering
  1482.           replace mode and entering the new note as normal.  The cursor
  1483.           then moves to the right.
  1484.  
  1485.           To enter replace mode, press upper case N.  To return to insert
  1486.           mode, press lower case n.  The current mode is displayed on the
  1487.           bottom status line.
  1488.  
  1489.           This operation throws off justification and generally
  1490.           necessitates that the justification command be invoked on this
  1491.           system at some later time.
  1492.  
  1493.           Pressing the left parenthesis key shifts the current note up one
  1494.           octave.  Pressing the right parenthesis key shifts the current
  1495.           note down one octave.  Afterwards the cursor moves one note to
  1496.           the right.
  1497.  
  1498.           Changing the Duration of the Current Note
  1499.           -----
  1500.           To change the duration of the current note to the current
  1501.           duration, press Alt-N.  The cursor then moves one note to the
  1502.           right.
  1503.  
  1504.           This operation throws off justification and generally
  1505.           necessitates that the justification command be invoked on this
  1506.           system at some later time.
  1507.  
  1508.  
  1509.                     MusicEase  -  Chapter 3:  BASIC EDITING / 23
  1510.  
  1511.  
  1512.           Changing the Pitch of the Current Note
  1513.           -----
  1514.           To change the pitch of the current note, press Ctrl-N to enter
  1515.           pitch mode and enter a note as normal.  Only the pitch of this
  1516.           note is used.  A note with this pitch but with the duration and
  1517.           all other attributes (e.g., lyrics, dynamics, spacing, etc.) of
  1518.           the current note replaces the current note.  The cursor then
  1519.           moves one note to the right.
  1520.  
  1521.           To return to insert mode, press lower case n.  The current mode
  1522.           is displayed on the bottom status line.
  1523.  
  1524.           In addition, pressing the left parenthesis key shifts the current
  1525.           note up one octave.  Pressing the right parenthesis key shifts
  1526.           the current note down one octave.  Afterwards the cursor moves
  1527.           one note to the right.
  1528.  
  1529.           Repeating a Note or Chord
  1530.           -----
  1531.           You can repeat the previous note (chord) by pressing ' (the
  1532.           single quote key).  This inserts a new note or chord whose
  1533.           pitch(es) equal those in the previous note and whose duration
  1534.           equals the current duration.  You can copy the previous note
  1535.           (chord) with any duration by first changing the current duration.
  1536.  
  1537.           Note that pressing t does the same thing but also ties the two
  1538.           notes or chords.
  1539.  
  1540.           Joining Two Notes into One Longer Note
  1541.           -----
  1542.           If the current note is not the last note on the staff and the sum
  1543.           of the duration of the current note and the following note is a
  1544.           valid amount of duration, pressing Alt-J extends the duration of
  1545.           the current note by the duration of the following note and then
  1546.           deletes the following note.
  1547.  
  1548.           This operation is useful, for example, when you have two notes
  1549.           which are tied and want to combine them into a single note.
  1550.           Position the cursor on the former note and press Alt-J.  This
  1551.           operation generally necessitates that the staff be rejustified at
  1552.           some later time.
  1553.  
  1554.           Inserting Invisible Notes
  1555.           -----
  1556.           Sometimes you want 2 voices in a staff, but only for part of a
  1557.           staff.  For instance, if you want 2 voices but only in the last
  1558.           measure of a staff, MusicEase requires that you use invisible
  1559.           notes in the previous measures so that there are notes for both
  1560.           voices for the entire staff.  You can enter an invisible note by
  1561.           pressing the lower case i key.  The note is entered with the
  1562.           current duration but is not displayed.  It can be deleted just
  1563.           like an ordinary note.  And you can position the cursor on it.
  1564.  
  1565.           Lyrics and chords can be attached to invisible notes.
  1566.  
  1567.  
  1568.                     MusicEase  -  Chapter 3:  BASIC EDITING / 24
  1569.  
  1570.  
  1571.           Examples of cases where you might want to use invisible notes are
  1572.  
  1573.           * Keyboard music where the piano part is specified using two
  1574.             connected staves (treble and bass staff).  Of course, you
  1575.             could use rests when no notes are sounding in one staff but
  1576.             often the preference is to leave the staff blank.
  1577.  
  1578.           * Keyboard or guitar music where the line consists of just
  1579.             single notes or chords for a while and then the line splits
  1580.             into several parts which sound simultaneously but have
  1581.             different durations.  Again the alternative is to use rests
  1582.             but often the preference is to use nothing that shows.
  1583.  
  1584.           * Generally chords appear directly above a note.  But if a  chord
  1585.             is to occur on the second beat, for instance, of a note, in
  1586.             order that it be positioned correctly after justification, it
  1587.             often works best to use invisible notes in the other voice
  1588.             with an invisible note occurring right when the chord is to
  1589.             occur.  This way the chord will be positioned correctly after
  1590.             justification.
  1591.  
  1592.           Cursor Movement
  1593.           -----
  1594.           The cursor always lies on a note or at the end of a staff.  At
  1595.           least you should think of it that way.  It may actually lie
  1596.           slightly above or below the current note with which it is
  1597.           vertically aligned.  Various keys move the cursor in the
  1598.           following ways:
  1599.  
  1600.           R         Jump to next note.
  1601.  
  1602.           -         Jump to previous note.
  1603.  
  1604.           -         Jump up to note in previous staff.
  1605.  
  1606.           -         Jump down to note in next staff.
  1607.  
  1608.           Ctrl--    Jump to previous measure.
  1609.  
  1610.           Ctrl-R    Jump to next measure.
  1611.  
  1612.           Ctrl-A    Jump to previous measure.
  1613.  
  1614.           Ctrl-F    Jump to next measure.
  1615.  
  1616.           PgUp      Jump up about a window's worth.
  1617.  
  1618.           PgDn      Jump down about a window's worth.
  1619.  
  1620.           Ctrl-PgUp Jump to start of first staff.
  1621.  
  1622.           Ctrl-PgDn Jump to start of last staff.
  1623.  
  1624.           ^         Jump up a system.
  1625.  
  1626.  
  1627.                     MusicEase  -  Chapter 3:  BASIC EDITING / 25
  1628.  
  1629.  
  1630.           &         Jump down a system.
  1631.  
  1632.           Home      Jump to start of current staff.
  1633.  
  1634.           End       Jump to end of current staff.
  1635.  
  1636.           Ctrl-Home Jump to top staff in current window.
  1637.  
  1638.           Ctrl-End  Jump to bottom staff in current window.
  1639.  
  1640.           F1        Jump to next window.
  1641.  
  1642.           F2        Jump to next pane of current window.
  1643.  
  1644.           Ctrl-Q B  Jump to start of block.
  1645.  
  1646.           Ctrl-Q C  Jump to start of last staff.
  1647.  
  1648.           Ctrl-Q D  Jump to end of current staff.
  1649.  
  1650.           Ctrl-Q E  Jump to top staff in current window.
  1651.  
  1652.           Ctrl-Q K  Jump to end of block.
  1653.  
  1654.           Ctrl-Q P  Jump to previous position.
  1655.  
  1656.           Ctrl-Q R  Jump to start of first staff.
  1657.  
  1658.           Ctrl-Q S  Jump to start of current staff.
  1659.  
  1660.           Ctrl-Q 0  Jump to bookmark 0.
  1661.  
  1662.           Ctrl-Q 1  Jump to bookmark 1.
  1663.  
  1664.           Ctrl-Q 2  Jump to bookmark 2.
  1665.  
  1666.           Ctrl-Q 3  Jump to bookmark 3.
  1667.  
  1668.           In addition the jUmp command allows you to jump to the Start or
  1669.           End of the piece.  If you select Measure and enter a measure
  1670.           number, you can jump directly to the beginning of that measure.
  1671.           Or you can jump to the Previous position.  By selecting sTaff,
  1672.           you can specify a staff number and page number and select a voice
  1673.           and jump directly to the specified staff and voice.
  1674.  
  1675.           Zooming
  1676.           -----
  1677.           You can zoom out and in by issuing the Zoom command.  It allows
  1678.           the screen to be displayed at 100%, 80%, 60%, 40% or 20% of its
  1679.           original size.
  1680.  
  1681.           Just press the first digit of the percentage you want.  If you
  1682.           zoom out, it is possible to see many more staves at a time.  Full
  1683.  
  1684.  
  1685.                     MusicEase  -  Chapter 3:  BASIC EDITING / 26
  1686.  
  1687.  
  1688.           editing capabilities are available no matter how much zooming has
  1689.           occurred.
  1690.  
  1691.           The speed key for zooming is lower case z.
  1692.  
  1693.           The Block
  1694.           -----
  1695.           The block is the name of a section of the score being edited.  It
  1696.           can be the entire score but usually it is a subsection of the
  1697.           score.  The block can be deleted, moved to another position,
  1698.           copied to another position, saved to a file and then merged into
  1699.           another score, modified through transposition, shifting, or
  1700.           inversion (see the modiFy command), and so forth.  Casting off
  1701.           (see the Cast-off command) and justification (see the Justify
  1702.           command) can be restricted just to the staves in the block.  Only
  1703.           one block can be defined at a time.
  1704.  
  1705.           To define the start of the block, position the cursor to the note
  1706.           which is to start the block.  Then press Ctrl-K B.  To define the
  1707.           end of the block, position the cursor to the note that is to lie
  1708.           immediately after the end of the block.  Then press Ctrl-K K.
  1709.           The end of the block must lie after the beginning of the block.
  1710.           If it does not, the beginning of the block is moved to the
  1711.           block's end.
  1712.  
  1713.           You can jump to the start of the block by entering Ctrl-Q B and
  1714.           to the end of the block by entering Ctrl-Q K.
  1715.  
  1716.           To delete the block, press Ctrl-K Y.  If you mistakenly delete
  1717.           the block, it can be recovered using the uNdelete command or by
  1718.           pressing Ctrl-U.  In fact you can cut the block using Ctrl-K Y
  1719.           and then move the cursor wherever you wish and paste the deleted
  1720.           block at that point by pressing Ctrl-U.
  1721.  
  1722.           To move the block, move the cursor to the position to which you
  1723.           want the block moved and then press Ctrl-K V.  This deletes the
  1724.           block from its original position and inserts it in front of the
  1725.           note at the cursor.
  1726.  
  1727.           You can copy the block by entering Ctrl-K C.  It works just like
  1728.           moving the block except the block is not deleted from its
  1729.           original location.
  1730.  
  1731.           To write a copy of the block to a file, press Ctrl-K W.  When you
  1732.           do this, you are first prompted to enter the name of the file.
  1733.           You can then later on merge this file into the score at the
  1734.           cursor by pressing Ctrl-K R and entering this file name at the
  1735.           prompt or issuing the Transfer Merge command.
  1736.  
  1737.           The Ctrl-K commands described above treat the block in a system
  1738.           sense.  Generally this is what you probably want.  I.e., the
  1739.           beginning of the block cuts vertically through the system at the
  1740.           beginning of the block.  Similarly for the end of the block.  For
  1741.           example, suppose the current system contains 3 staves and the
  1742.  
  1743.  
  1744.                     MusicEase  -  Chapter 3:  BASIC EDITING / 27
  1745.  
  1746.  
  1747.           beginning and end of the block are both located on the second
  1748.           staff in the current system.  If we now press Ctrl-K Y, deleting
  1749.           the block, we actually delete sections from all three staves.
  1750.           These sections start and end at vertical durational locations
  1751.           equal as close as possible to the start and end of the block.
  1752.  
  1753.           To have the block treated in a contiguous sense so that in the
  1754.           above example only a section from the second staff is deleted,
  1755.           use instead of Ctrl-K.  That is, to delete the block as a
  1756.           contiguous section, press .  To move it, press Ctrl-P V.  To copy
  1757.           it, press Ctrl-P C.  To write a copy of it to a file, press
  1758.           Ctrl-P W.  To merge a file in a contiguous sense, press Ctrl-P R
  1759.           and enter the file name at the prompt or issue a Transfer mErge-
  1760.           contiguous command.
  1761.  
  1762.           Starting a New Page
  1763.           -----
  1764.           Normally MusicEase fits as many staves as it can on a page.  You
  1765.           can specify a new page is to begin with the current staff by
  1766.           issuing the Insert New-page command.  Pressing p also does this.
  1767.  
  1768.           Page separations determined by MusicEase are shown by a dashed
  1769.           horizontal line while those due to the user issuing a new page
  1770.           command are shown by a solid horizontal line.
  1771.  
  1772.            MusicEase repaginates automatically before printing and several
  1773.           other operations.  To invoke repagination directly, issue a Print
  1774.           Repaginate command.  After this is done and the screen has been
  1775.           redisplayed, all page separations will be visible on screen.
  1776.  
  1777.           Clearing the Current Window
  1778.           -----
  1779.           Sometimes you wish to delete everything in the current window so
  1780.           it appears just like when you invoked MusicEase.  Transfer Clear
  1781.           does this.  But if you haven't saved the score in that window
  1782.           since it was last changed, you will first be asked if you really
  1783.           want to abandon your score.
  1784.  
  1785.           Erasing
  1786.           -----
  1787.           You can erase barlines, changes of meters, key signatures and
  1788.           clefs, new page specifications and many other items by moving the
  1789.           cursor to the note to which the item is attached and issuing an
  1790.           Erase command for the item.  For bars, meters, keys and clefs,
  1791.           move to the note just after the item and issue Erase Bar, Erase
  1792.           Meter, Erase Key or Erase Clef commands.  For a new page, move to
  1793.           the staff just after the new page and issue an Erase New-page
  1794.           command.  Of course, when you delete a note, everything attached
  1795.           to the note is erased also.  This includes symbols, lyrics,
  1796.           dynamics, chords, text, endings, any wedge, tie, slur starts or
  1797.           ends, tuplets, etc.
  1798.  
  1799.           The speed key to get you directly to the Erase menu is upper case
  1800.           X.
  1801.  
  1802.  
  1803.                     MusicEase  -  Chapter 3:  BASIC EDITING / 28
  1804.  
  1805.  
  1806.           Horizontal Spacing
  1807.           -----
  1808.           Since the correct horizontal spacing of notes cannot be
  1809.           determined until all notes, lyrics, etc., have been entered for
  1810.           the entire system, the horizontal spacing of notes as they are
  1811.           entered (before the current system is justified) is directly
  1812.           proportional to the their duration.  If notes of short duration
  1813.           are overlapping, you can increase this proportion from its
  1814.           initial setting using the Option entry-Width command.  This is
  1815.           useful when entering 32nd and 64th notes which otherwise might
  1816.           overlap.  This does not affect justified staves.
  1817.  
  1818.  
  1819.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 29
  1820.  
  1821.  
  1822.           4
  1823.                     Other Markings
  1824.  
  1825.  
  1826.           This chapter describes how to add ties, slurs, tuplets, symbols,
  1827.           dynamic marks, lyrics and other text, chords and chord frames,
  1828.           instrument names, repeat signs, wedges, overlays, endings,
  1829.           multiple rests, and measure numbers to a score.
  1830.  
  1831.           Ties
  1832.           -----
  1833.           To add a tie between two notes, move the cursor to the first note
  1834.           and issue an Insert tIe command.  A quicker way to do this
  1835.           without moving into the menu system is to press upper case T.
  1836.  
  1837.           The quickest way to enter tied notes is as follows: Enter the
  1838.           first note (or chord) as normal.  Then if the second (tied) note
  1839.           or chord is to have a different duration than the first, change
  1840.           the current duration.  Then press lower case t.  This will copy
  1841.           the previous pitches with the current duration and add tie lines
  1842.           all with a single keystroke.
  1843.  
  1844.           Changing the Looks of a Tie
  1845.           -----
  1846.           If the automatic positioning of a tie is unsatisfactory, you can
  1847.           change it by positioning the cursor on the first of the tied
  1848.           notes and issuing a View Shift Tie command.  This allows you to
  1849.           flip the direction of a tie's arc, alter its height and flatness
  1850.           and change its starting and ending locations, and make it
  1851.           invisible.  However this should not be done until all notes have
  1852.           been entered and the staff justified because notes in another
  1853.           voice, for instance, might effect the positioning of the tie.
  1854.  
  1855.           Occasionally it is necessary to add a tie when only one of the
  1856.           notes being tied is there.  This can happen, for instance, when
  1857.           an ending begins with a tied note.  Or when a long score is
  1858.           divided into several files and a note at the beginning of the
  1859.           first system in a continuation file is tied with the last note in
  1860.           the same part in the previous file.  The symbols up-tie and down-
  1861.           tie are available for such situations. (See the section on
  1862.           symbols later in this chapter.)  They can be inserted with the
  1863.           first note and then shifted (using the View Shift Symbol command)
  1864.           so they lie to the left of the note.  The up-tie symbol arcs up
  1865.           and the down-tie symbol arcs down.  To get an idea of how much
  1866.           this shift should be, the space from one staff line to a next is
  1867.           5 while the width of a notehead is 10.  If you are entering
  1868.           several of these for a chord, insert and shift the first one,
  1869.           then insert and shift the second one, and so on.  To figure out
  1870.           how much to shift, use the following: the distance from one staff
  1871.           line to the next is 5, and the width of a notehead is 12.
  1872.  
  1873.           Slurs
  1874.           -----
  1875.  
  1876.  
  1877.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 30
  1878.  
  1879.  
  1880.           To specify the note where a slur is to end, move the cursor to it
  1881.           and issue an Insert slUr End command.  Then to specify the note
  1882.           where the slur is to begin, move the cursor to it and then issue
  1883.           an Insert slUr Start command.  If you do this in reverse order,
  1884.           you may see a slur extent from the start note to the end of the
  1885.           staff.  Since the corresponding slur end has not been entered,
  1886.           MusicEase thinks the slur is extending to the next system and
  1887.           displays it accordingly.  When the slur end is inserted and the
  1888.           staff redisplayed though, the same result is be obtained.
  1889.  
  1890.           A quicker way (and the recommended way) to enter a slur while you
  1891.           are entering notes is to press Alt-S after you have entered the
  1892.           note on which the slur is to end.  You are then prompted for the
  1893.           number of notes backwards on which the slur is to begin.  It is
  1894.           assumed the slur is to end on the previous note.  After this
  1895.           number is entered and Enter pressed, the slur is created
  1896.           extending between the specified notes.  Note that this only works
  1897.           for slurs that are completely contained on a single staff.  This
  1898.           menu also allows you to enter the text and font for a label which
  1899.           will be attached to the slur.  Such labels are useful in
  1900.           tablature notation for specifying hammer-ons, pull-offs and so
  1901.           forth.
  1902.  
  1903.           Changing the Looks of a Slur
  1904.           -----
  1905.           If the automatic positioning of a slur is unsatisfactory, you can
  1906.           change it by positioning the cursor on the note which begins the
  1907.           slur and issuing a View Shift sLur command.  This allows you to
  1908.           flip the direction of a slur's arc, and alter its starting and
  1909.           ending locations and the two interior points which define its
  1910.           shape.  Slurs are displayed using bezier curves.  A bezier curve
  1911.           is defined by 4 points: a point at the beginning and another
  1912.           point at the end of the curve,  and two interior points which
  1913.           control the shape of the curve.  The two interior points do not
  1914.           lie on the curve --- moving them changes its shape but does not
  1915.           change its endpoints.  Each point is defined by X and Y
  1916.           coordinates.  A point's X coordinate refers to its horizontal
  1917.           position while its Y coordinate refers to its vertical position.
  1918.           Thus these points are defined by two fields each --- one for the
  1919.           X coordinate and one for the Y coordinate.  This command also
  1920.           allows you to add, delete, or edit a label and font for the slur
  1921.           and to vertically and horizontally shift it if its automatic
  1922.           placement is unsatisfactory.
  1923.  
  1924.           If a slur is split with part at the end of one staff and part at
  1925.           the beginning of another, you can change the shape of the latter
  1926.           part by positioning the cursor on the note which ends the slur
  1927.           and using View Shift slur-eNd.  It works just as the above
  1928.           described command except it does not allow any flipping.
  1929.  
  1930.           Tuplets
  1931.           -----
  1932.           To specify a tuplet, first enter the notes to appear in the
  1933.           tuplet as usual.  For example, to create an eighth note triplet,
  1934.  
  1935.  
  1936.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 31
  1937.  
  1938.  
  1939.           first enter the three eighth notes.  Then move the cursor to the
  1940.           first note of the tuplet and invoke Insert Tuplet.
  1941.  
  1942.           You are then presented with 2 data entry fields and 2 selection
  1943.           fields.  First you generally enter the number of notes in the
  1944.           tuplet.  For a triplet enter 3.  Then enter the normal number of
  1945.           notes this tuplet spans.  For a triplet enter 2.  (You will have
  1946.           three notes in what is normally the duration of two notes.)
  1947.  
  1948.           Now select the unit of duration.  For eighth note triplets select
  1949.           8.  Then if the unit is dotted, select the number of dots.
  1950.  
  1951.           The fifth field is for an alternate numeral to be displayed with
  1952.           the tuplet instead of the number in the first field of the menu.
  1953.           If the number in the first field is satisfactory, leave this
  1954.           fifth field blank.  Or if you want something like "3:2" to
  1955.           display, enter it in this field.  If you enter a dash ("-"), no
  1956.           numeral or bracket will be displayed.
  1957.  
  1958.           Then press Enter.
  1959.  
  1960.           There are several faster ways to specify tuplets without going
  1961.           through the menu system.  After you have entered the last note of
  1962.           the tuplet, press ; (semicolon).  Enter the number of notes to
  1963.           the left with which the tuplet is to begin and then press Enter.
  1964.           Now the Insert Tuplet menu appears and you proceed as above.
  1965.  
  1966.           Or you can move the cursor to the first note of the tuplet and
  1967.           press lower case p.  This invokes the Insert Tuplet menu.  Again
  1968.           proceed as above.
  1969.  
  1970.           Changing the Looks of a Tuplet
  1971.           -----
  1972.           If a tuplet can be beamed to the exact length of a tuplet and the
  1973.           tuplet number lies on the same side of the noteheads as the beam,
  1974.           no bracket is displayed.  Otherwise a bracket is used in addition
  1975.           to the number.  Moving the cursor to the note which starts the
  1976.           tuplet and issuing a View Shift tUplet command allows you to flip
  1977.           the position of the tuplet vertically, inhibit or require that a
  1978.           bracket be used, and change the vertical locations of the ends of
  1979.           the bracket.
  1980.  
  1981.           Symbols
  1982.           -----
  1983.           MusicEase provides a number of symbols which you can attach to
  1984.           the current note.
  1985.  
  1986.  
  1987.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 32
  1988.  
  1989.  
  1990.           To add a symbol to the current note, issue an Insert Symbol
  1991.           command.  The symbol menu works slightly different from other
  1992.           menus.  This is because there are too many symbols to see them
  1993.           all at once.  You can use the cursor keys to move through the
  1994.           symbols which are arranged alphabetically.  Vertical scrolling
  1995.           will occur when necessary.  Pressing a letter key moves the
  1996.           highlight to the first symbol starting with that letter.
  1997.           Pressing the Space bar moves the highlight to the next symbol.
  1998.           Once the desired symbol is highlighted, press Enter to complete
  1999.           the process.
  2000.  
  2001.           To reach the symbol menu quickly while editing, press lower case
  2002.           s.
  2003.  
  2004.           To repeat the last Insert Symbol command, press Ctrl-Z.  This is
  2005.           useful, for instance, when you want to create a number of
  2006.           staccato notes.  Position the cursor at the first, press s and
  2007.           insert the first occurrence of the symbol, then continuously
  2008.           press Ctrl-Z until done.
  2009.  
  2010.           Changing the Location of a Symbol
  2011.           -----
  2012.           Symbols are positioned automatically by MusicEase around the note
  2013.           to which they are attached.  You can override this positioning by
  2014.           issuing a View Shift Symbol command.  You first select the symbol
  2015.           of the current note to be shifted.  Then you can shift it
  2016.           horizontally and vertically.
  2017.  
  2018.           If you have several of the same symbol inserted at a note, the
  2019.           one shifted is the last one you inserted.
  2020.  
  2021.           The speed key for the View Shift command is Alt-V.
  2022.  
  2023.           Fonts
  2024.           -----
  2025.           For dynamics, lyrics, the title of the piece and many other
  2026.           things MusicEase provides several different fonts.  These fonts
  2027.           are generally presented as numbers in menus with the user being
  2028.           able to select the desired font.  The correspondence between
  2029.           numbers and fonts is displayed below.
  2030.  
  2031.                     1    8.5 point lineprinter
  2032.  
  2033.                     2    12 point Times Roman
  2034.  
  2035.                     3    12 point Times Roman bold
  2036.  
  2037.                     4    12 point Times Roman italic
  2038.  
  2039.                     5    12 point Times Roman bold italic
  2040.  
  2041.                     6    20 point bold (dot matrix printer)
  2042.  
  2043.                     6    18 point Times Roman bold (laser printer)
  2044.  
  2045.  
  2046.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 33
  2047.  
  2048.  
  2049.           Sometimes the choice Default is included.  Default fonts are
  2050.           available for lyrics, dynamics and chord names.  They can be
  2051.           changed using the Options Font command.
  2052.  
  2053.           If you have a laser printer, you must insure that it has the
  2054.           appropriate fonts listed above before you print out a score.  If
  2055.           you have a LaserJet III or 4, they are built into the printer.
  2056.           Otherwise you must download the appropriate soft fonts or plug in
  2057.           the appropriate font cartridge.
  2058.  
  2059.           Foreign Characters
  2060.  
  2061.  
  2062.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 34
  2063.  
  2064.  
  2065.           -----
  2066.           The following foreign characters are available:
  2067.  
  2068.                     CueaaaaceeeiiiAAEaAooouuyOUc#Y__aiounN
  2069.  
  2070.           These characters correspond to ascii codes 128 through 165.  To
  2071.           insert one, hold the Alt key down while entering the 3 digit code
  2072.           on the numeric keypad of your computer.  For example, holding
  2073.           down  Alt and pressing 128 yields the character "C".
  2074.  
  2075.           MusicEase expects your laser printer to be using the PC-8 symbol
  2076.           set to print foreign characters.  If you are printing on a dot-
  2077.           matrix printer which does not support the PC-8 character set, the
  2078.           field in the Options Printer-font command  should be set to "No".
  2079.           MusicEase will then print these characters instead of using the
  2080.           printer's character definitions.
  2081.  
  2082.           Dynamics
  2083.           -----
  2084.           Dynamic markings are attached to notes.  You should attach a
  2085.           dynamic to the note nearest to it.  Issuing an Insert Dynamic
  2086.           command brings up a menu which allows you to enter the text of
  2087.           the dynamic, the location of it, the font to use and whether or
  2088.           not to enclose it in a rectangular box.
  2089.  
  2090.           If the text you enter is something like mf or sfz or ppp,
  2091.           MusicEase uses special graphic characters for the dynamics.
  2092.           Otherwise it uses the font you specify.
  2093.  
  2094.           For position you can choose to have the text located either above
  2095.           or below the staff centered horizontally with the current note.
  2096.           Or if you select Special for the position, you can also specify
  2097.           that the text be vertically centered with the current staff or
  2098.           flush with the current note along with any vertical shift.  For
  2099.           horizontal positioning you can choose among having it centered
  2100.           over the current note, flush with the current note, centered
  2101.           between the left and right margins, positioned at the left or
  2102.           right margins, or positioned at the first barline preceding the
  2103.           current note.  You can also specify any extra horizontal shift.
  2104.  
  2105.           To reach the Insert Dynamic menu quickly while editing, press y.
  2106.  
  2107.           Lyrics
  2108.           -----
  2109.           Lyrics are attached to notes.  You can add a lyric to the current
  2110.           note by issuing an Insert Lyric command.  You will be prompted
  2111.           for the text, the lyric number (from 1 to 9) and the font.  If
  2112.           you select the default font, the lyric default font is used.
  2113.  
  2114.           Lyrics are centered under the notes to which they are attached.
  2115.           If you end a lyric with a hyphen ("-") and there is a lyric for
  2116.           the next note with the same lyric number, the hyphen will be
  2117.           centered between the two lyrics.  View Shift Hyphen allows you to
  2118.  
  2119.  
  2120.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 35
  2121.  
  2122.  
  2123.           shift a lyric hyphen horizontally if necessary.  The command
  2124.           should be issued with the note that occurs after the hyphen.
  2125.  
  2126.           If the lyric consists solely of an underscore character ("_"), an
  2127.           underline is made to extend from the end of the lyric with the
  2128.           same lyric number on the previous note to the current note.  View
  2129.           Shift Underscore allows you to change the starting and ending
  2130.           locations of an underscore if necessary.
  2131.  
  2132.           You can invoke the Insert Lyric menu quickly while editing by
  2133.           pressing l.
  2134.  
  2135.           Creating Lyrics for an Entire Staff
  2136.           -----
  2137.           You can enter an entire lyric line at once for the current staff
  2138.           by issuing the Insert lYric-line command.  When you do so, you
  2139.           are first prompted for the verse number (lyric number).  After
  2140.           you select the verse number and press Enter,  the entire current
  2141.           lyric line is displayed (no matter where the cursor is) with
  2142.           periods appearing for notes and rests which do not have lyrics.
  2143.           You can edit this using normal text editing commands (See Chapter
  2144.           4).  You can also select the font.
  2145.  
  2146.           In particular, hyphens act as word separators as do spaces.  A
  2147.           solitary period (surrounded by spaces) results in no lyric for
  2148.           the corresponding note.  Hyphens and solitary underscores yield
  2149.           the same results as described for individual lyric words above.
  2150.  
  2151.           When lyrics are entered, some words may overlap.  Justification
  2152.           will cure this problem as it takes lyric widths into account when
  2153.           calculating note spacing.
  2154.  
  2155.           Invoke the Insert lYric-line menu quickly while editing by
  2156.           pressing Y.
  2157.  
  2158.           Verse Numbers
  2159.           -----
  2160.           To insert text which is not directly centered under notes but is
  2161.           horizontally aligned with lyrics such as verse numbers, you can
  2162.           use the Insert teXt command.  The height of 12 point lyrics is
  2163.           10.  To enter text horizontally aligned with the second lyric
  2164.           line, shift it vertically down 10 (using the "Below" general
  2165.           vertical placement), for the third lyric line, shift it 20, and
  2166.           so forth.
  2167.  
  2168.           Chords
  2169.           -----
  2170.           To insert a chord connected with the current note, issue the
  2171.           command.  You enter the text for the chord (e.g., "Am"), whether
  2172.           a chord frame is desired, which beat of the current note the
  2173.           chord is to be horizontally centered at, the font and any
  2174.           vertical shift.  If you specified that a chord frame be created,
  2175.           a second menu will appear after pressing Enter.
  2176.  
  2177.  
  2178.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 36
  2179.  
  2180.  
  2181.           To enter a chord name containing a flat sign, use the % key.  For
  2182.           example, for B flat, enter B%.  And for a natural sign, use the $
  2183.           character.  MusicEase then knows that it should use its internal
  2184.           symbols for these signs.  E.g., instead of a % character, it
  2185.           displays and prints a flat sign.  Instead of a $ character, it
  2186.           displays and prints a natural sign.  And instead of a #
  2187.           character, it displays and prints a sharp sign.  If you use a
  2188.           lower case b character instead of the % character, chords using
  2189.           this character will not be transposed correctly.  Otherwise there
  2190.           is no problem.
  2191.  
  2192.           Chord Frames
  2193.           -----
  2194.           For a chord frame you specify 1) the fingerings, 2) the location
  2195.           of any barring, and 3) any text to appear beside the chord (e.g.,
  2196.           "5th fret").
  2197.  
  2198.           A chord frame can have from 2 to 9 strings.  The number of
  2199.           strings is equal to the number of characters you enter for the
  2200.           Fingerings field.  Entering B means leave the string blank, O
  2201.           means leave the string open (and place a small circle above this
  2202.           string of the chord frame), 1 means place a small filled-in
  2203.           circle above the first fret, 2 means place a small filled-in
  2204.           circle above the second fret and so on.  These characters can be
  2205.           upper or lower case.
  2206.  
  2207.           If you want a curved line to appear between the circles on 2
  2208.           strings (indicating the player is to bar across these strings),
  2209.           for the Bar field enter the number of the left string where the
  2210.           bar starts and then the number of the right string where the bar
  2211.           ends.  For instance for an F major chord on the guitar, you would
  2212.           enter "16" --- the bar extends from the first through the sixth
  2213.           string.
  2214.  
  2215.           You can invoke the Insert cHord menu quickly while editing by
  2216.           pressing lower case h.  You can repeat an earlier chord
  2217.           specification quickly by pressing  and entering the same text for
  2218.           the chord (e.g., "Am") as previously.  The same chord
  2219.           specification including any chord frame will be added to the
  2220.           current note.
  2221.  
  2222.           If you are inserting several chords at the same note and using
  2223.           only a single voice, the recommended method is:  Enter the chord
  2224.           sounding simultaneously with the note as usual.  Then go to the
  2225.           other voice and insert invisible notes so that there is an
  2226.           invisible note sounding at the same time as the other chords and
  2227.           insert the other chords at their corresponding invisible notes.
  2228.           This guarantees that after justification, the chords will appear
  2229.           at their proper locations.
  2230.  
  2231.           Accidental Signs Above Notes
  2232.           -----
  2233.  
  2234.  
  2235.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 37
  2236.  
  2237.  
  2238.           You can use the Insert Chord command to display solitary
  2239.           accidental signs above a note: the chord text should be # for a
  2240.           sharp, $ for a natural, and % for a flat symbol.
  2241.  
  2242.           Instrument Names
  2243.           -----
  2244.           You can attach an instrument name or any other text to a staff by
  2245.           issuing a View Heading command.  You enter the text, the font,
  2246.           any vertical and horizontal shifting of the location of the text
  2247.           and whether this instrument name should be included when new
  2248.           staves and systems are created from this staff (by pressing Enter
  2249.           or Ctrl-Enter).  The text is then positioned to the left of the
  2250.           current staff.  The start of the staff is shifted right far
  2251.           enough to accommodate the longest instrument name in the system.
  2252.           You can erase an instrument name by replacing its text with
  2253.           blanks.
  2254.  
  2255.           General Text
  2256.           -----
  2257.           You can in general place text anywhere on the page by invoking
  2258.           Insert teXt.  This text is saved with the current note.
  2259.           MusicEase's redisplay algorithms do not take into account such
  2260.           arbitrary text when clearing the screen since it can be located
  2261.           anywhere.  Thus you may see such text only momentarily during
  2262.           editing.  However during printing and print preview it will be
  2263.           there.
  2264.  
  2265.           The Insert teXt menu allows you to specify the text, position,
  2266.           whether the text is to start flush with the note or be centered
  2267.           vertically with it, font and whether or not a rectangular border
  2268.           should appear around the text.
  2269.  
  2270.           For position you can choose to have the text located either above
  2271.           or below the staff centered horizontally with the current note.
  2272.           Or if you select Special for the position, you can also specify
  2273.           that the text be vertically centered with the current staff or
  2274.           flush with the current note along with any vertical shift.  For
  2275.           horizontal positioning you can choose among having it centered
  2276.           over or flush with the current note, centered between the left
  2277.           and right margins, positioned at the left or right margins, or
  2278.           positioned at the first barline preceding the current note.  You
  2279.           can also specify any extra horizontal shift.  To get an idea how
  2280.           much to shift, staff lines are spaced 5 apart and the width of a
  2281.           notehead is 12.
  2282.  
  2283.           Repeated Measures
  2284.           -----
  2285.           You can enter a repeat measure sign by issuing an Insert repeAt
  2286.           command.  You are prompted to enter a number which will be placed
  2287.           above the repeat measure sign indicating how many times the
  2288.           measure is to be repeated.  This sign can be deleted just like an
  2289.           ordinary note.
  2290.  
  2291.  
  2292.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 38
  2293.  
  2294.  
  2295.           Repeated Beats
  2296.           -----
  2297.           You can enter a repeat beat sign (a large slash extending from
  2298.           the second to fourth staff lines) by pressing the / key.  The
  2299.           duration of this slash is the current duration.  It can be
  2300.           deleted like an ordinary note.  This notation is sometimes used
  2301.           in popular music.
  2302.  
  2303.           Multiple Measure Rests
  2304.           -----
  2305.           To insert a multiple measure rest, issue an Insert Rests command.
  2306.           You are prompted for the number of measures the rest should
  2307.           extend  This sign can be deleted just like an ordinary note.
  2308.           Alt-M is the speed key for the Insert Rests command.
  2309.  
  2310.           Measure Numbers
  2311.           -----
  2312.           Measure numbers can be automatically inserted by invoking View
  2313.           nUmbers.  Numbers can be inserted or deleted via this menu.  They
  2314.           can be located at the beginning of the first staff of every
  2315.           system, at every measure, every 5 measures or every 10 measures.
  2316.           You specify the font and whether the measure numbers should be
  2317.           enclosed in a rectangular box and the number of the first
  2318.           measure.
  2319.  
  2320.           Measure numbers are added as dynamics.  If the automatic
  2321.           positioning of a number is unsatisfactory, it can be shifted
  2322.           using the Insert Dynamic command after moving the cursor to the
  2323.           first note in the measure.
  2324.  
  2325.           Wedges
  2326.           -----
  2327.           Crescendo and diminuendo wedges can be gotten using the Insert
  2328.           Wedge command.  It must be issued twice, once for the note at
  2329.           which it begins and once for the note at which the wedge ends.
  2330.           When specifying the note at which it begins, you also specify the
  2331.           direction in which the wedge is to point, and whether it is to
  2332.           lie above or below the staff.
  2333.  
  2334.           You can quickly insert a wedge by pressing the > key just after
  2335.           you have entered the note nearest the right end of the wedge.
  2336.           You first enter the number of notes backwards where the wedge is
  2337.           to start.  The wedge will extend from that note to the note just
  2338.           before the current note.  You can also specify the direction and
  2339.           general vertical location of the wedge.
  2340.  
  2341.           If the left end of a wedge starts with the current note, you can
  2342.           use the View Shift Wedge command to shift either end horizontally
  2343.           and to shift the whole wedge vertically.  If a wedge extends from
  2344.           the end of one staff into the beginning of another, the View
  2345.           Shift wedge-enD command can be used to shift the second part of
  2346.           the wedge if the wedge ending note is the current note.
  2347.  
  2348.  
  2349.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 39
  2350.  
  2351.  
  2352.           Arpeggios
  2353.           -----
  2354.           You can insert an arpeggiation symbol to the left of the current
  2355.           note with the Insert + Arppegio command.  The Erase + Arpeggiatio
  2356.           command erases any arpeggio attached to the current note.
  2357.  
  2358.           To shift an arpeggio attached to the current note horizontally,
  2359.           vertically or to extend its height, use the View Shift Arpeggio
  2360.           command.
  2361.  
  2362.           Endings
  2363.           -----
  2364.           To create first and second endings and so forth, issue an Insert
  2365.           Ending command.  Endings must be an integral number of measures
  2366.           long.  If the ending is only one measure long and the right end
  2367.           should have a corner, you should select Both in the Part field.
  2368.           In that case the ending will extend through the current measure
  2369.           only and have a corner at the right.  If you select One-measure-
  2370.           start, there will be no right corner.  For an ending which
  2371.           extends for several measures, select Start while in the starting
  2372.           measure and then invoke the Insert Ending command again when you
  2373.           are in the ending measure but this time select End.  When you
  2374.           specify either Both, One-measure-start or Start for the Part
  2375.           field, you must specify the number(s) of the endings and
  2376.           optionally any vertical shift for the ending.
  2377.  
  2378.           Ending heights are set to appear above any notes, chords,
  2379.           symbols, etc. that occur under them.  Alter the height by
  2380.           specifying a vertical shift for an ending.  0 (zero) is the speed
  2381.           key for the Insert Ending command.
  2382.  
  2383.           Overlays
  2384.           -----
  2385.           Overlays consist of items like trills, crescendos followed by
  2386.           evenly spaced dots, or 8va sections where you have an extended
  2387.           leader which can be either solid, dashed, dotted, jagged or wavy.
  2388.           The overlay starts with the current note.  You reach the overlay
  2389.           menu by issuing an Insert Overlay command.  For each overlay you
  2390.           specify its length (in notes), any starting and ending text and
  2391.           associated fonts, the leader and the vertical position (either
  2392.           above the staff or below it).  For any overlay whose leader is to
  2393.           end with a corner, enter CORNER as the value of the End-text
  2394.           field.  If the overlay is positioned above the staff, the corner
  2395.           will point up.  Otherwise it will point down.
  2396.  
  2397.           You can alter the positioning of the text and leader and the
  2398.           spacing of the leader for any overlays associated with the
  2399.           current note by issuing a View Shift Overlay command.  To change
  2400.           the length of the leader, shift the End-text field horizontally.
  2401.           This works even if there is no end text such as in a trill.
  2402.  
  2403.           Trills
  2404.           -----
  2405.  
  2406.  
  2407.                     MusicEase  -  Chapter 4:  OTHER MARKINGS / 40
  2408.  
  2409.  
  2410.           To create a trill overlay, fill in the overlay menu as follows:
  2411.           enter either TR or TR2 for the Start-text field and select Wavy
  2412.           for the Leader field.  Then enter the length of the overlay (the
  2413.           number of notes it covers).  If you want an accidental sign to
  2414.           appear after the TR or TR2, enter #, $, or % (for sharp, natural
  2415.           or flat) after the TR or TR2 in the Start-text field.  E.g., TR2%
  2416.           would result in a flat sign being displayed.
  2417.  
  2418.           Octave Transpositions
  2419.           -----
  2420.           To create an octave transposition overlay, fill in the overlay
  2421.           menu as follows: enter 8VA for the Start-text field, select Line
  2422.           or Dashes for the Leader field, and enter CORNER for the End-text
  2423.           field.  Then enter the length of the overlay (the number of notes
  2424.           it covers).
  2425.  
  2426.  
  2427.                     MusicEase  -  Chapter 5:  FINER CONTROL / 41
  2428.  
  2429.  
  2430.           5
  2431.                     Finer Control
  2432.  
  2433.  
  2434.           This chapter describes how various automatic placements and other
  2435.           decisions made by MusicEase can be overridden.  It also describes
  2436.           how to set bookmarks and jump to them, and search for and replace
  2437.           notes.
  2438.  
  2439.           Forcing Accidentals to Display
  2440.           -----
  2441.           You can display a precautionary accidental by issuing a View
  2442.           Accidental command.  If you select Yes in the Display field, the
  2443.           sign of the current note will always display, even if it lies
  2444.           within the current key.  If you select Automatic, MusicEase will
  2445.           decide if the accidental should be displayed.
  2446.  
  2447.           You can optionally specify that the accidental be enclosed by
  2448.           parentheses.  This menu also allows you to shift the accidental
  2449.           horizontally.
  2450.  
  2451.           Capital K is the speed key for working with this menu.  It is
  2452.           usually issued after inserting the note or chord it is to act on.
  2453.           If the note before the cursor is not a rest or an invisible note
  2454.           or a chord and does not have its sign forced to be displayed,
  2455.           pressing K will force it to be displayed.  Otherwise the View
  2456.           Accidental menu will be invoked on this previous note.
  2457.  
  2458.           Beams
  2459.           -----
  2460.           Initially MusicEase is set to use beams instead of flags when
  2461.           possible.  You can force that only flags are ever used by issuing
  2462.           a View Options Beam command and selecting No.
  2463.  
  2464.           Defining the Beaming Pattern
  2465.           -----
  2466.           MusicEase knows what the standard beaming pattern is for many
  2467.           meters.  However there are some meters such as 7/8 which can be
  2468.           beamed differently at different times.  You can define the
  2469.           beaming pattern to be used for the current meter by issuing a
  2470.           View beaming-Pattern command.  You enter the beat numbers on
  2471.           which beams are to begin separated by spaces.  For example, if
  2472.           the current meter is 7/8 and you want it broken into a 2 + 3 + 2
  2473.           beaming pattern, you would enter "1 3 6".  Beams are to begin on
  2474.           the first, third and sixth beats.
  2475.  
  2476.           Defining the Scope of a Beam
  2477.           -----
  2478.           You can change the number of notes that are beamed together by
  2479.           positioning the cursor on the first note to be beamed and issuing
  2480.           a View Beam command.  You then enter the number of notes to beam
  2481.           together starting with the current note.  This is often useful
  2482.           when creating tuplets.
  2483.  
  2484.  
  2485.                     MusicEase  -  Chapter 5:  FINER CONTROL / 42
  2486.  
  2487.  
  2488.           Entering 0 for the number results in the current note being
  2489.           displayed using flags.  To return control of determining the
  2490.           length of the beam to MusicEase, set the value of the field to a
  2491.           blank.
  2492.  
  2493.           You can access the View Beam menu quickly while editing by
  2494.           pressing the _ (underscore) key.  MusicEase also automatically
  2495.           determines which notes to beam together and the direction of the
  2496.           beam.
  2497.  
  2498.           Flipping the Direction of a Beam
  2499.           -----
  2500.           You can flip the direction of a beam by pressing the Alt-! key
  2501.           when the current note is the start of the beam.  Repeating the
  2502.           operation removes the flip directive.
  2503.  
  2504.           Beam Slant
  2505.           -----
  2506.           You can specify the maximum amount of slant for beams using the
  2507.           View Beam command.  It is initially set to its maximum allowed
  2508.           angle of 100%.  You can specify the new maximum as a percentage
  2509.           of this original maximum if beams are too slanted for you.  To
  2510.           alter the slant of only a specific beam, see the section on stems
  2511.           later on.
  2512.  
  2513.           Stems
  2514.           -----
  2515.           MusicEase initially is set to alternate note stems in staves with
  2516.           only one voice.  You can override this behavior by issuing a View
  2517.           Options Alternate command and selecting No.
  2518.  
  2519.           You can force a change in the direction of the stem of the
  2520.           current note (if it is not connected to a beam) by pressing the
  2521.           exclamation key !.  This also makes the next note the current
  2522.           note to facilitate changing the stem directions on a number of
  2523.           adjacent notes.  Pressing ! a second time with the same current
  2524.           note removes this forced change of direction.
  2525.  
  2526.           MusicEase automatically determines the proper length for a stem.
  2527.           In the rare case you wish to change a stem length, you can use
  2528.           View Shift steM.  If the current note is not beamed, entering 5
  2529.           in this field will extend the stem length by a staff space.  A
  2530.           value of 10 increases it by 2 staff spaces.
  2531.  
  2532.           If the current note lies at the beginning or end of a beam, a
  2533.           value of 2 changes the stem length by a staff space.  If Yes is
  2534.           selected for the "All" field, all stems in the beam will be
  2535.           changed by the specified amount.  Otherwise just the one end will
  2536.           be changed while the other end will remain as it was.  Stems
  2537.           lying in between will be altered as necessary to remain touching
  2538.           the outermost beam but not extend through it.  Note that this can
  2539.           be used to change the beam slant.  To cancel stem extension, set
  2540.           the value to zero.
  2541.  
  2542.  
  2543.                     MusicEase  -  Chapter 5:  FINER CONTROL / 43
  2544.  
  2545.  
  2546.           Pressing Ctrl-I makes the notehead of the current note invisible.
  2547.           It then makes the next note the current note.  Pressing Ctrl-I a
  2548.           second time with the same current note makes its notehead visible
  2549.           again.
  2550.  
  2551.           Pressing Alt-I makes the stem and any flag in the current note
  2552.           invisible.  It then makes the next note the current note.
  2553.           Pressing Alt-I a second time with the same current note makes its
  2554.           stem and any flag visible again.  If the current note is the
  2555.           first note of a beamed group of notes, Alt-I makes the beams and
  2556.           stems of all the notes in the beamed group invisible.
  2557.  
  2558.           Pressing = makes any flags in the current note invisible.  It
  2559.           then makes the next note the current note.  Pressing = a second
  2560.           time with the same current note makes its flags visible again.
  2561.           If the current note is the first note of a beamed group of notes,
  2562.           = makes the beams invisible.
  2563.  
  2564.           Initial Barline
  2565.           -----
  2566.           MusicEase is initially set to display a barline at the beginning
  2567.           of each staff.  In some instances such as a score for an
  2568.           extracted part, you don't want this initial barline.  Issuing a
  2569.           View Options Initial-barline command and then selecting No will
  2570.           insure that no barlines are displayed at the left end of any
  2571.           staves.
  2572.  
  2573.           Barline Space
  2574.           -----
  2575.           You can alter the amount of horizontal space MusicEase places
  2576.           after barlines via the View Options baR-space command.
  2577.  
  2578.           Shifting Notes and Rests
  2579.           -----
  2580.           To shift the current note horizontally, issue a View Shift Note
  2581.           command and enter the amount of the shift.  This menu also allows
  2582.           you to specify that a tablature note number be enclosed in
  2583.           parentheses which can be used to specify things like a tied note
  2584.           on which a slide begins.
  2585.  
  2586.           Rests can be shifted similarly using the View Shift Rest command.
  2587.           They can also be shifted vertically.
  2588.  
  2589.           Interstaff Spacing
  2590.           -----
  2591.           When MusicEase repaginates a score, it determines the vertical
  2592.           spacing between the various staves on a page so that they fill
  2593.           the page (unless it is the last page and you have specified that
  2594.           the last page not be filled using Print Layout Options).
  2595.           Dynamics, chords and lyrics are included in calculating the
  2596.           height of a staff.  Text (from the Insert teXt command) is not.
  2597.           Thus you can position text anywhere on the page and it will not
  2598.           affect the spacing between staves.
  2599.  
  2600.  
  2601.                     MusicEase  -  Chapter 5:  FINER CONTROL / 44
  2602.  
  2603.  
  2604.           You can change the amount of spacing between the current staff
  2605.           and the following staff using View sTaff.  MusicEase will adjust
  2606.           the spacing between other staves on the page to accommodate this
  2607.           change.  Alt-T is the speed key for View sTaff.
  2608.  
  2609.           Use Print preView to see what the interstaff spacing is for the
  2610.           current page.
  2611.  
  2612.           Staff Lines
  2613.           -----
  2614.           You can make individual lines of the current staff invisible
  2615.           using View sTaff.  Using this feature allows, for instance, a
  2616.           percussion staff in which all staff lines are invisible except
  2617.           the middle (third) line.
  2618.  
  2619.           Naming a Staff
  2620.           -----
  2621.           You might want to name a staff for use with View Visible Names.
  2622.           If so, you can do this through View Name.  If you name the staves
  2623.           in the first system, then when you create new staves from it (for
  2624.           instance, by pressing Enter), the new staves will have the same
  2625.           names in the corresponding positions.
  2626.  
  2627.           Making Some Staves Invisible
  2628.           -----
  2629.           You can make some staves invisible using View Visible.  This can
  2630.           allow you to see more of certain staves on screen at a time.  Or
  2631.           you can save a version of the score with only the visible staves
  2632.           in it (see Transfer Save).  In particular, this can be used for
  2633.           part extraction.  Or using MIDI playback, you hear what just the
  2634.           visible staves sound like when played together.
  2635.  
  2636.           The View Visible menu provides 4 selections.  If you select All,
  2637.           the entire score is made visible.  If you select Current, only
  2638.           the current staff and corresponding staves in other systems are
  2639.           made visible.  The rest of the staves will not be displayed (but
  2640.           they are still there).  If you select Names, you can list the
  2641.           names of the staves to be visible.  And if you select nUmbers,
  2642.           you can list the numbers of the staves in each system to be
  2643.           visible.
  2644.  
  2645.           Quicker Screen Displays
  2646.           -----
  2647.           Normally when the score in the current window is edited,
  2648.           MusicEase checks the height of effected staves and then
  2649.           redisplays entirely any staves whose new heights differ
  2650.           significantly from their old heights.  You can turn this checking
  2651.           off most of the time by issuing a View Options Quick command or
  2652.           by pressing a lower case q while editing.
  2653.  
  2654.           The price you pay for this speeding up of redisplaying the screen
  2655.           is that some notes and other items may temporarily be clipped or
  2656.           overlap something on a neighboring staff.  Printing will not be
  2657.  
  2658.  
  2659.                     MusicEase  -  Chapter 5:  FINER CONTROL / 45
  2660.  
  2661.  
  2662.           effected.  When this quick display mode is active, an upper case
  2663.           Q appears at the beginning of the second status line.
  2664.  
  2665.           Bookmarks
  2666.           -----
  2667.           You can set up to four bookmarks and then later jump to them.
  2668.           These bookmarks are numbered 0, 1, 2 and 3.  To set a bookmark at
  2669.           the current note, press Ctrl-K followed by the number of the
  2670.           bookmark.  To jump to a bookmark, press Ctrl-Q followed by the
  2671.           number of the bookmark.
  2672.  
  2673.           Search
  2674.           -----
  2675.           You can search for a note using the Search command.  You select
  2676.           the note and any accidental, e.g., A#.  The cursor then jumps to
  2677.           the next A#.  The octave does not matter.  To get to the search
  2678.           menu while editing, press Ctrl-Q F.  To repeat a search command
  2679.           while editing, press Ctrl-L.
  2680.  
  2681.           Replace
  2682.           -----
  2683.           You can search for a note and then replace it with another note
  2684.           using the Replace command.  You select the note and any
  2685.           accidental, e.g., Ab, just as with search and then select the
  2686.           note and accidental to replace it with, e.g., G#.  The cursor
  2687.           then jumps to the next Ab.  The octave does not matter.  It then
  2688.           replaces it with the nearest G#.  Optionally the replacement can
  2689.           be global.  That is, all occurrences of the search note are
  2690.           replaced by the replace note.
  2691.  
  2692.           To get to the replace menu while editing, press Ctrl-Q A.  To
  2693.           repeat a replace command while editing, press Ctrl-L.
  2694.  
  2695.           Tempo Designation
  2696.           -----
  2697.           To create a tempo designation first insert the appropriate tempo
  2698.           note symbol using Insert Symbol.  Then use the Insert teXt
  2699.           command to add the text (e.g., "= 120") and select the Special
  2700.           option to shift the text horizontally.  To get a tempo note which
  2701.           is dotted, start the text with a period.
  2702.  
  2703.           True WYSIWYG
  2704.           -----
  2705.           To speed up screen displays, when staves have been scrolled
  2706.           horizontally so the initial notes of the staves do not show,
  2707.           MusicEase begins displaying with the first note in each staff
  2708.           which will appear on the screen.  Beams, slurs, ties, tuplets and
  2709.           so forth that begin before that note do not appear even when they
  2710.           include the note.  This can make it difficult when entering
  2711.           complex music involving overlapping slurs, tuplets, symbols, and
  2712.           etc. to get the positioning of everything right if you must
  2713.           change the positioning MusicEase automatically performs.  Using
  2714.           View Options true-View, you can get MusicEase to go through the
  2715.           display of everything.  The result is that all beams, slurs,
  2716.  
  2717.  
  2718.                     MusicEase  -  Chapter 5:  FINER CONTROL / 46
  2719.  
  2720.  
  2721.           ties, tuplets and symbol placements will display exactly as they
  2722.           will print out.  It does slow down the redisplay process when
  2723.           staves have been horizontally scrolled to the left.
  2724.  
  2725.  
  2726.                       MusicEase  -  Chapter 6:  TABLATURE / 47
  2727.  
  2728.  
  2729.           6
  2730.                     Tablature
  2731.  
  2732.  
  2733.           This chapter describes how to create tablature notation for
  2734.           stringed instruments.
  2735.  
  2736.           Specifying Tablature
  2737.           -----
  2738.           To specify that the current staff is to be displayed using
  2739.           tablature notation, use the View Tablature menu.  If you select
  2740.           "Yes" for tablature, you must also indicate the number of strings
  2741.           (from 1 to 14) and the tuning of each string.  However for
  2742.           guitar, banjo and mandolin with standard tunings, you can just
  2743.           select the appropriate instrument.  Otherwise select "Special"
  2744.           and enter the MIDI pitch numbers for the strings starting with
  2745.           the highest (the thinnest string) and moving downwards.  Insert a
  2746.           space between each number.  The number of these numbers
  2747.           determines the number of strings.
  2748.  
  2749.           The MIDI pitch number for middle C is 60.  The B one fret (half
  2750.           step) down is 59.  The Bb one fret (half step) down from that is
  2751.           58, and so on.  The D two frets (two half steps or one whole
  2752.           step) above middle C is 62.  If a staff has been entered as
  2753.           tablature and you then change the staff to display as standard
  2754.           music notation, it will be displayed as standard music notation.
  2755.           However the reverse will not work unless the staff was originally
  2756.           created using tablature.
  2757.  
  2758.           Options Tablature provides a quick way of turning all tablature
  2759.           staves into standard notation and vice-versa.
  2760.  
  2761.           Entering Tablature
  2762.           -----
  2763.           To enter tablature numbers, you must first specify the string and
  2764.           then the number.  The strings are specified by the letters "a",
  2765.           "b", "c", "d", "e", "f", "g", "A", "B", "C", "D", "E", "F" and
  2766.           "G" in that order from top to bottom.  If there are only 6
  2767.           strings (as with a guitar), the letters "a" through "f" would be
  2768.           used to specify the first through sixth strings.  After
  2769.           specifying the string, there are several possibilities:
  2770.  
  2771.           * If the number for the string consists of a single digit, just
  2772.             press the key for that digit;
  2773.  
  2774.           * If the number for the string consists of several digits, press
  2775.             the letter X (for "extended"), enter the number and  then press
  2776.             the Enter key when done;
  2777.  
  2778.           * If a slide has been entered for the current note and it is a
  2779.             chord, you can make the line invisible for the string by
  2780.             entering the letter S.  Repeating the operation makes the line
  2781.             visible again.
  2782.  
  2783.  
  2784.                       MusicEase  -  Chapter 6:  TABLATURE / 48
  2785.  
  2786.  
  2787.           Other things work the same as with standard notation.  To delete
  2788.           the previous note (i.e., tablature numbers), press the Backspace
  2789.           key.  To create chords, press the + key.  You can delete the
  2790.           number associated with a particular string by entering a blank
  2791.           for that string.
  2792.  
  2793.           Tablature Options
  2794.           -----
  2795.           View Options tabLature allows you to specify whether or not
  2796.           tablature numbers should have stems, if fret numbers are to be
  2797.           displayed above their respective strings instead of on them, the
  2798.           width of single bar lines (these are 1 in standard notation), and
  2799.           if the word TAB should be displayed at the start of tablature
  2800.           staves in the first system, in all systems, or not at all.
  2801.  
  2802.           Slides
  2803.           -----
  2804.           The Insert + Slide menu inserts one or more slanted lines at the
  2805.           current note.  If "Up" is selected, the line slants up going to
  2806.           the right.  Otherwise it slants down.  If "Between" is selected,
  2807.           the line extends from the current note to the next note (if both
  2808.           are sounded); if "Left" is selected, the line lies to the left of
  2809.           the current note; if "Right" is selected, the line lies to the
  2810.           right of the current note; and if "left-And-between" is selected,
  2811.           it is as if a combination of "Left" and "Between" has been
  2812.           selected.
  2813.  
  2814.           There is one line for each tablature number or notehead (if
  2815.           standard notation is being displayed) in the current note.
  2816.           Optionally these lines can be labeled just as with slurs by
  2817.           specifying text and a font.  If there is a label, it can be
  2818.           shifted both horizontally and vertically using the last two
  2819.           fields.
  2820.  
  2821.           NOTE: For slides between chords, there should be the same number
  2822.           of pitches in each chord.
  2823.  
  2824.           The speed key for slides is the backslash "\".  It allows you to
  2825.           quickly add slides.  You first enter the number of notes
  2826.           backwards where the slide is to be inserted.  Then you proceed
  2827.           just as if the cursor was on that note and you had issued an
  2828.           Insert + Slide command.
  2829.  
  2830.           To erase the slide line for a particular pitch in a chord,
  2831.           specify the string and then enter "S" instead of a number.  This
  2832.           will make any slides for that pitch invisible.  Repeating the
  2833.           operation makes the slide visible once again.
  2834.  
  2835.           Erase + Slide deletes all slides associated with the current
  2836.           note.
  2837.  
  2838.           Nuances
  2839.           -----
  2840.  
  2841.  
  2842.                       MusicEase  -  Chapter 6:  TABLATURE / 49
  2843.  
  2844.  
  2845.           For hammer-ons and pull-offs, use labeled slurs.  For fretboard
  2846.           tapping, insert labeled slurs after justifying with the label "t"
  2847.           or "+".  For certain types of slides, use a combination of a
  2848.           labeled slur and Insert + Slide.  Tremelos can be obtained via
  2849.           the Insert Symbol command.  For vibrato use Insert Overlay with
  2850.           leder equal to "wavy".  For shake or exaggerated vibrato, use
  2851.           Insert Overlay with leder equal to "jagged".  For muffled
  2852.           strings, use an "X" notehead (Alt-X switches between ordinary
  2853.           notes or numbers, X's, and diamonds.)
  2854.  
  2855.           View Shift Note permits the enclosing of tablature numbers within
  2856.           parentheses.  This can be used for tied notes on which, for
  2857.           example, a slide begins.
  2858.  
  2859.           Adding Standard Notation
  2860.           -----
  2861.           If you have defined a piece solely using tablature and want to
  2862.           precede each tablature staff by its equivalent in standard
  2863.           notation, use the modiFy eXpand-tablature command.  It does just
  2864.           that and justifies the result.  To reverse this operation and
  2865.           return to tablature only staves for perhaps some editing, use the
  2866.           modiFy Contract-tablature command.
  2867.  
  2868.  
  2869.                      MusicEase  -  Chapter 7: STORING SCOR /   50
  2870.  
  2871.  
  2872.           7
  2873.                     Storing Scores
  2874.  
  2875.  
  2876.           This chapter describes how to save a score to a file and how to
  2877.           load a score saved in a file plus several other commands dealing
  2878.           with files.
  2879.  
  2880.           Saving a Score
  2881.           -----
  2882.           You can save the score in the current window by issuing a
  2883.           Transfer Save command.  You are prompted for the name of the
  2884.           file.  The name can be up to 8 characters long.  Optionally you
  2885.           can follow this by a period and up to 3 more characters (this is
  2886.           called the "extension" of the file).  If you don't include an
  2887.           extension, MusicEase automatically adds the extension "MEZ".  If
  2888.           you don't want any extension, just include the period.
  2889.  
  2890.           If you enter the name of a file that already exists and is not
  2891.           the name of the file you loaded most recently into the current
  2892.           window, you will be asked if you want to overwrite the file that
  2893.           currently has this name.  Respond by pressing Y for Yes if you
  2894.           want to overwrite the old file.  Otherwise press N for No.
  2895.  
  2896.           A quick way to invoke Transfer Save when you are editing is to
  2897.           press V.
  2898.  
  2899.           Autosave automatically saves the current piece as it is being
  2900.           edited.  Options Autosave allows you to turn this off and/or
  2901.           change the minimum number of keystrokes and the number of seconds
  2902.           after which the current piece is automatically saved in the
  2903.           current directory under the name MUSICEZ.ASV. If a catastrophic
  2904.           error occurs, the autosaved piece can be recovered using this
  2905.           name with the Transfer Load command.
  2906.  
  2907.           Initially the number of keystrokes is set to 10 and the number of
  2908.           seconds to 5.  Thus the current piece will be autosaved whenever
  2909.           a minimum of 10 keystrokes have been entered after the last
  2910.           autosave and there is a pause of 5 seconds.
  2911.  
  2912.           Loading a Score
  2913.           -----
  2914.           To load a score which has previously been saved in a file, issue
  2915.           a Transfer Load command.  First you must enter the name of the
  2916.           file you want to load.  If you don't include an extension,
  2917.           MusicEase assumes you want the file with the extension "MEZ".  Or
  2918.           you can press the F1 key to have a list of all files with
  2919.           extensions of MEZ displayed. The cursor keys move the highlight
  2920.           from one file name to another.  Pressing Enter loads the
  2921.           highlighted file.  If there are too many files to all appear at
  2922.           once, pressing PgDn and PgUp will scroll a windowful at a time.
  2923.           Directories are displayed with a vertical bar in front and a
  2924.           backslash at the end.  Pressing Enter when a directory is
  2925.           highlighted changes the current directory to that directory.  To
  2926.  
  2927.  
  2928.                      MusicEase  -  Chapter 7: STORING SCOR /   51
  2929.  
  2930.  
  2931.           have files displayed with an extension other than MEZ, for
  2932.           example, "MID", first enter *.MID as the file name and then press
  2933.           F1.  To get all files starting with the letter "S" and with an
  2934.           extension of "MID", first enter S*.MID as the file name and press
  2935.           F1.  And so forth.
  2936.  
  2937.           If no such file exists, you will hear an error beep and the
  2938.           cursor will be positioned at the beginning of the name you
  2939.           entered.  Either enter the name of an existing file or press Esc
  2940.           to back out of this command.
  2941.  
  2942.           If you want to see the names of the files you have in the current
  2943.           directory, exit temporarily to DOS (see Executing DOS Commands in
  2944.           Chapter 2) and issue a  DIR  command or a  DIR  *.MEZ  command.
  2945.  
  2946.           If you have edited the score in the current window, you will
  2947.           first be asked if you want to abandon the edited version of the
  2948.           score in the current window.  You can respond either Y for yes or
  2949.           N for no.  Responding N returns you to the initial Transfer Load
  2950.           menu.
  2951.  
  2952.           Loading a MIDI File
  2953.           -----
  2954.           You use this same Transfer Load command to load a MIDI file.
  2955.           (MIDI stands for Musical Instrument Digital Interface.)
  2956.           MusicEase detects automatically that it is a MIDI file.  In this
  2957.           case loading will usually take longer because MusicEase must
  2958.           convert the representation used in the MIDI file to its own
  2959.           representation.  You will receive feedback on such conversion on
  2960.           the message line near the bottom of your screen.
  2961.  
  2962.           MIDI files come in several varieties.  MusicEase reads and writes
  2963.           both format 0 and format 1 MIDI files.  If the file being loaded
  2964.           is a format 0 MIDI file, each channel is placed on a separate
  2965.           staff.  If it is a format 1 MIDI file, each track is placed on a
  2966.           separate staff.
  2967.  
  2968.           After loading a MIDI file, you will have a single (usually quite
  2969.           long) system in the current window.  No system breaks have been
  2970.           inserted yet.  Before you do anything else, you should save this
  2971.           score (in case anything goes wrong later) and then perform the
  2972.           following steps:
  2973.  
  2974.           * Place any brackets and braces on this system (see the View
  2975.             Connect command).  This is so that when this long system is
  2976.             broken up into a number of systems (using the Cast-off
  2977.             command), the systems will have braces and brackets in the
  2978.             right places.  Otherwise you must add them later on to each
  2979.             system individually.
  2980.  
  2981.           * If the score starts with a partial measure, insert barlines in
  2982.             each staff at the end of the partial measure.  If you
  2983.             don't do this, when MusicEase later divides notes up, they
  2984.             will be divided up incorrectly.  (For instance, MIDI file
  2985.  
  2986.  
  2987.                      MusicEase  -  Chapter 7: STORING SCOR /   52
  2988.  
  2989.  
  2990.             notes are stored without knowledge of barlines.  Thus a note
  2991.             whose duration extends across a barline must be divided into
  2992.             several notes which are tied together.)
  2993.  
  2994.           * Define the beaming pattern for the meter if necessary (see the
  2995.             View beaming-Pattern command).  If the beaming pattern is
  2996.             incorrect, notes may be divided up incorrectly.
  2997.  
  2998.           * Issue the Cast-off Full command to divide up notes that extend
  2999.             across barlines and to break this system up into page-width
  3000.             sized systems.
  3001.  
  3002.           * Optionally invoke the Modify Divide command with the last
  3003.             option in the menu set to Yes to divide up notes and rests
  3004.             that extend across beat boundaries.
  3005.  
  3006.           * Optionally if the piece is in a minor mode and the wrong  note
  3007.             equivalents occur a lot (e.g., Ab appears instead of G#), try
  3008.             transposing (using the modiFy Transpose command) the piece up
  3009.             3 steps (to its relative major) with the Inharmonic field set
  3010.             to Yes and then back down 3 steps.  Then use the Replace
  3011.             command to search for and change any remaining "wrong" notes
  3012.             to their proper equivalents.
  3013.  
  3014.           MusicEase expects the music in MIDI files loaded into it to have
  3015.           been created with a steady tempo.  It also should have been
  3016.           quantized.
  3017.  
  3018.           Merging a Score
  3019.           -----
  3020.           You can merge a score from a file with the score you are
  3021.           currently editing using the Transfer Merge command.  You must
  3022.           first enter the name of the file to be merged.  Or press F1 to
  3023.           have a list of files displayed (see Transfer Load).  If the file
  3024.           exists, it will be inserted just before the current note.  This
  3025.           insertion will be in the system sense described in the block
  3026.           commands.  That is, it will be like pressing Ctrl-K V where the
  3027.           block is the file in this case.
  3028.  
  3029.           To merge a score from a file in a contiguous sense (see the
  3030.           description of the block commands), use the Transfer mErge-
  3031.           contiguous command.  This acts like pressing Ctrl-P V where the
  3032.           block is the file in this case.
  3033.  
  3034.           You cannot merge a MIDI file.  To get around this, first load the
  3035.           MIDI file and then save it using the Transfer Save command.  It
  3036.           is now a MusicEase file and can be merged.
  3037.  
  3038.           Deleting a File
  3039.           -----
  3040.           To delete a file, use the Transfer Delete command.  This will
  3041.           delete the file which has the name that you enter at the prompt
  3042.           or that you select after pressing F1 (see Transfer Load).
  3043.  
  3044.  
  3045.                      MusicEase  -  Chapter 7: STORING SCOR /   53
  3046.  
  3047.  
  3048.           Saving a Score As a MIDI File
  3049.           -----
  3050.           You can save the score in the current window as a standard MIDI
  3051.           file by using the Transfer saVe-midi-file command.  Besides the
  3052.           name, you select the MIDI format in which it is to be saved.
  3053.  
  3054.           A number of other music software products such as sequencing
  3055.           programs can utilize MIDI files.  Thus you can create pieces with
  3056.           other programs and then load them into MusicEase to obtain scores
  3057.           relatively quickly and painlessly.  You can also use MIDI files
  3058.           to move MusicEase scores into other software products.
  3059.  
  3060.           Note however that MIDI files capture basically just notes as far
  3061.           as scoring is concerned.  There is no standard way of saving
  3062.           other information such as information regarding chords and chord
  3063.           frames, lyrics, slurs, clefs, and so forth.  Thus when you save a
  3064.           MusicEase score as a MIDI file and then load it back into
  3065.           MusicEase, much of the information in the original may be lost.
  3066.  
  3067.           Saving a Score As a TIFF File
  3068.           -----
  3069.           You can save a page of the score in the current window as a TIFF
  3070.           file by using the Transfer save-Tiff command.  The page saved is
  3071.           the first page to be printed as specified in the Print Options
  3072.           menu.  Thus to save an entire piece which is 2 pages long, you
  3073.           must run save-Tiff twice.  Note however that, as MusicEase does
  3074.           not have its own fonts, no text is saved in the TIFF file.
  3075.  
  3076.           A number of other software products such as word processing and
  3077.           graphics programs can import TIFF files.  Thus you can create
  3078.           pieces with MusicEase, save them as TIFF files and have the
  3079.           scores displayed as part of documents or other graphics items.
  3080.  
  3081.  
  3082.                        MusicEase  -  Chapter 8:  PRINTING / 54
  3083.  
  3084.  
  3085.           8
  3086.                     Printing
  3087.  
  3088.  
  3089.           This chapter describes how to print out a score contained in a
  3090.           MusicEase window and how to set parameters dealing with printing
  3091.           such as the page margins and page size, the printer type, the
  3092.           amount of indentation for the first system, previewing printed
  3093.           pages and the formatting of the systems themselves.
  3094.  
  3095.           Specifying Your Printer
  3096.           -----
  3097.           The menu contains a field for selecting your printer type.
  3098.           MusicEase supports 5 printers (and compatibles).  You can select
  3099.           either a 9 pin Epson dot matrix printer, a 24 pin Epson dot
  3100.           matrix printer, an HP LaserJet II laser printer, an HP LaserJet
  3101.           III or higher laser printer, or an HP DeskJet inkjet printer.
  3102.           Score formatting varies slightly depending on the printer.  Thus
  3103.           if you change the printer, you should rejustify (see the Justify
  3104.           command) a score before printing it.
  3105.  
  3106.           Foreign Characters on Dot Matrix Printers
  3107.           -----
  3108.           If you have a dot matrix printer and it prints foreign characters
  3109.           using the PC-8 symbol set, the menu in the Options Printer-font
  3110.           command should be set to "Yes".  Otherwise it should be set to
  3111.           "No".  Then if you are printing foreign characters and your dot
  3112.           matrix printer cannot print them using its own character
  3113.           definitions, MusicEase will use its own bitmaps for such
  3114.           characters.
  3115.  
  3116.           Printing a Score
  3117.           -----
  3118.           Before you print out a score, you might want to see how your
  3119.           score looks by issuing the Print preView command.  Selecting pgUp
  3120.           and pgDn allows you to see previous or following pages.  This way
  3121.           you can see if staves are too wide to fit on the page.  Certain
  3122.           things like the title lines and composer and "text" (see the
  3123.           Insert teXt command) can generally only be seen using print
  3124.           preview.  Select Exit to leave print preview.
  3125.  
  3126.           To print the score in the current window, invoke Print Printer.
  3127.  
  3128.           It also contains a field in which you can specify if the file
  3129.           should contain a printer initialization command at its start.
  3130.           Normally the answer to this should be Yes so it will be in a
  3131.           known state.  However, if you want to include some MusicEase
  3132.           output in a text document, some word processing files allow you
  3133.           to import a "print file".  In such a case you don't want the
  3134.           printer initialized (if it is a laser printer, initialization
  3135.           causes all temporary soft fonts to be erased and an eject page
  3136.           command to be issued).  The No value also causes the last eject
  3137.           page command to be skipped.  If you are including this print file
  3138.           in a document being printed on a dot matrix printer, define the
  3139.  
  3140.  
  3141.                        MusicEase  -  Chapter 8:  PRINTING / 55
  3142.  
  3143.  
  3144.           page size for this music to be the same size as the space left
  3145.           for it in your document.  If including it in a document being
  3146.           printed on a laser printer, you must increase the MusicEase page
  3147.           top margin enough so that the music is printed at the specified
  3148.           position down the page.  It is easiest if you arrange things so
  3149.           that it prints out at the top of the page, in which case you want
  3150.           the MusicEase top margin to be the same as your document's.
  3151.  
  3152.           Printouts can be either draft or final copy quality.  You select
  3153.           the quality in the menu.  For dot matrix printers, the difference
  3154.           in the two qualities lies in the quality of many of the curved
  3155.           and slanted lines.  Draft mode prints faster but some lines (such
  3156.           as ties and slurs and slanted beams) are drawn more crudely.
  3157.  
  3158.           For laser and deskjet printers, ties, and slurs are not printed
  3159.           in draft copies.  Otherwise the printouts are the same.  Printing
  3160.           the curved lines from ties and slurs is slow on laser and deskjet
  3161.           printers relative to the speed of printing other things.  It is
  3162.           highly recommended to first print out your score in draft mode.
  3163.           Once it looks satisfactory, then print out the final copy.
  3164.  
  3165.           When printing to a laser or deskjet printer, MusicEase uses the
  3166.           default symbol set.  If your scores are printing with the wrong
  3167.           fonts, make sure that the default symbol set is available in
  3168.           Times-Roman.
  3169.  
  3170.           To print only a specific page range of the score, select Pages
  3171.           for the Range field in the menu and then enter the numbers of the
  3172.           first and last pages to be printed.
  3173.  
  3174.           Entering the Title
  3175.           -----
  3176.           To enter the title, invoke Print Layout Title.  It can consist of
  3177.           any number of lines of text.  You first must select the line
  3178.           number.  Initially since there are no lines yet entered for the
  3179.           title, the only choice is 1.  Select No in the Delete field since
  3180.           we do not want to delete this line of the title and press Enter.
  3181.           Then enter the text for this line and select the font to be used
  3182.           for it.
  3183.  
  3184.           Title lines are placed at the top of the first page.  They are
  3185.           either centered or left adjusted depending on the value of the
  3186.           Title field in the menu.
  3187.  
  3188.           Entering the Lyricist
  3189.           -----
  3190.           To enter the lyricist, use the Print Layout Lyricist command.
  3191.           The lyricist can consist of any number of lines of text.  You
  3192.           first must select the line number.  Initially since there are no
  3193.           lines yet entered for the lyricist, the only choice is 1.  Select
  3194.           No in the Delete field since we do not want to delete this line
  3195.           of the lyricist.  Then press Enter.
  3196.  
  3197.  
  3198.                        MusicEase  -  Chapter 8:  PRINTING / 56
  3199.  
  3200.  
  3201.           Now enter the text for this line and select the font to be used
  3202.           for it.  The lyricist text is placed as a block at the left
  3203.           margin on the first page generally under the title.  Its exact
  3204.           vertical position can be changed in the Lyricist field of the
  3205.           menu.  The lines within this block of lyricist text can have
  3206.           several different alignments.  A line can be left adjusted so it
  3207.           starts at the left margin.  It can be centered under the longest
  3208.           lyricist line or right adjusted under the longest line.  The
  3209.           selection in the Alignment field determines which is used.
  3210.           Generally you want to make all lines have the same alignment.  A
  3211.           value of a period is displayed as a blank.  This allows the
  3212.           addition of more space before the first staff via the last field
  3213.           in Print Layout Options.
  3214.  
  3215.           Entering the Composer
  3216.           -----
  3217.           To enter the composer, use the Print Layout Composer command.
  3218.           The composer can consist of any number of lines of text.  You
  3219.           first must select the line number.  Initially since there are no
  3220.           lines yet entered for the composer, the only choice is 1.  Select
  3221.           No in the Delete field since we do not want to delete this line
  3222.           of the composer.  Then press Enter and enter the text for this
  3223.           line and select the font to be used for it.
  3224.  
  3225.           The composer text is placed as a block at the right margin on the
  3226.           first page generally under the title.  Its exact vertical
  3227.           position can be changed in the Composer field of the menu.  The
  3228.           lines within this block of composer text can have several
  3229.           different alignments.  A line can be right adjusted so it ends at
  3230.           the right margin.  It can be centered under the longest composer
  3231.           line.  Or it can be left adjusted under the longest line.  The
  3232.           selection in the Alignment field determines which is used.
  3233.           Generally you want to make all lines have the same alignment.
  3234.  
  3235.           A value of a period is displayed as a blank.  This allows the
  3236.           addition of more space before the first staff via the last field
  3237.           in Print Layout Options.
  3238.  
  3239.           Page Layout
  3240.           -----
  3241.           The menu resulting from issuing the Print Layout Page command
  3242.           allows you to specify the values of the page length, page width,
  3243.           left margin, right margin, top margin, bottom margin, footer
  3244.           margin and the print orientation.
  3245.  
  3246.           The footer margin is the distance from the bottom of the page at
  3247.           which to position any footer (bottom positioned running head ---
  3248.           see Print Layout Running-head).
  3249.  
  3250.           The print orientation is only meaningful for laser printers.  It
  3251.           specifies whether to print in the normal direction (portrait) or
  3252.           sideways (landscape).  You can generally print fewer but wider
  3253.           lines in landscape mode.
  3254.  
  3255.  
  3256.                        MusicEase  -  Chapter 8:  PRINTING / 57
  3257.  
  3258.  
  3259.           You can specify horizontal measurements in inches, centimeters,
  3260.           or points.  For vertical measurements you can also use lines.
  3261.           Use the following abbreviations:
  3262.  
  3263.                               " or In   Inches
  3264.  
  3265.                               Cm        Centimeters
  3266.  
  3267.                               Li        Lines
  3268.  
  3269.                               Pt        Points
  3270.  
  3271.           If the margins are too large for the page size, an error will
  3272.           result and the highlight will be positioned on the margin field
  3273.           it was processing when the error was detected.
  3274.  
  3275.           Measurements will be displayed in the default unit which can be
  3276.           set using the Options Unit command.  The default unit can be
  3277.           either inch, centimeter or printer's point.
  3278.  
  3279.           Repagination
  3280.           -----
  3281.           The score in the current window will be repaginated when Print
  3282.           Repaginate is invoked.  It is also automatically repaginated by
  3283.           several other commands such as the Print Printer command and the
  3284.           Print preView command.
  3285.  
  3286.           MusicEase will fit as many staves as it can on a page.  It uses
  3287.           the page length and top and bottom margins to calculate the area
  3288.           available for this.  A dashed line will appear wherever it has
  3289.           determined a new page should start.  Solid lines appear above
  3290.           staves where the user has invoked Insert New-page.
  3291.  
  3292.           Systems are automatically spaced evenly vertically so that they
  3293.           fill the page except possibly for the last page.  In Print Layout
  3294.           Options, you can specify whether or not to fill the last page in
  3295.           the Fill field.  If you specify Yes, you can specify how much
  3296.           space in addition to the bottom margin to leave at the bottom of
  3297.           the page by entering a vertical measurement in the Last-page
  3298.           field.
  3299.  
  3300.           Running Heads
  3301.           -----
  3302.           A running head is a header or footer that appears either at the
  3303.           top or the bottom of a page, usually in the margin.  The default
  3304.           running head is positioned at the bottom of all pages.  It prints
  3305.           the page number centered and the date at the right margin.
  3306.  
  3307.           To create a running head, issue the Print Layout Running-head
  3308.           command.  Select the position (Top or Bottom of the page) and on
  3309.           which pages this running head is to appear.  You can specify it
  3310.           is to appear on All pages, just the First page, all-But-first
  3311.           page, just Even pages or just Odd pages.  If several running
  3312.  
  3313.  
  3314.                        MusicEase  -  Chapter 8:  PRINTING / 58
  3315.  
  3316.  
  3317.           heads are applicable to the top at the same time, the more
  3318.           specific is used.  Similarly for the bottom of the page.
  3319.  
  3320.           Once you have selected the position and pages for the running
  3321.           head, another menu appears which allows you to enter the text and
  3322.           font for the running head.  The fields are initialized to the
  3323.           current running head with the same position and pages if there is
  3324.           one.  You can enter text that is to be left adjusted to the left
  3325.           margin, centered between the margins, and right adjusted to the
  3326.           right margin.  The words "(Page)" ``                                             (File)'' and "(Date)" stand
  3327.           for the page number, file name and the date.  When the running
  3328.           head is printed, the current page number, file name and date will
  3329.           be substituted wherever these strings appear.  The default
  3330.           running head uses both page and date.  To delete the date
  3331.           printout from the default running head, press Ctrl-Y when the
  3332.           cursor is in the Right field.
  3333.  
  3334.           Justification
  3335.           -----
  3336.           Usually you want to justify a staff so that it extends from the
  3337.           left margin to the right margin.  (The exception is the first
  3338.           system which is often indented slightly.)  This can be done by
  3339.           using the Justify command.  You can justify the entire score,
  3340.           just the systems in the block or just the current system.  You
  3341.           can also unjustify staves with this command.  This is useful when
  3342.           you need to edit a justified system.  Newly entered notes usually
  3343.           will not have the same horizontal spacing as notes that existed
  3344.           when a staff was justified.
  3345.  
  3346.           If the value of the Method field is "Equal", extra space is
  3347.           distributed "evenly" among all notes on a staff.  If the value is
  3348.           "Linear", extra space is distributed more in proportion to notes'
  3349.           durations.  This method may be more appropriate for instrumental
  3350.           music whereas the Equal method may be more appropriate for music
  3351.           with lyrics.
  3352.  
  3353.           It may happen that a justified staff will extend past the right
  3354.           margin.  You can see this using the Print preView command.  If
  3355.           such is the case, you should fix this before printing.  One way
  3356.           to fix it is to make the staff shorter by inserting a staff break
  3357.           at a measure before the end.
  3358.  
  3359.           If you want to change the spacing of notes, you can force a note
  3360.           to take up more width using the View note-Width command (speed
  3361.           key is Ctrl-W).  This allows you to increase the width given to a
  3362.           note or rest.  You should then justify the staff to see the new
  3363.           spacing.  During justification this additional space will be
  3364.           taken from other notes on the staff if possible.  Increasing a
  3365.           note's width in this way is taken into account during cast-off
  3366.           (see following).
  3367.  
  3368.           Cast Off
  3369.           -----
  3370.  
  3371.  
  3372.                        MusicEase  -  Chapter 8:  PRINTING / 59
  3373.  
  3374.  
  3375.           Casting off is the term used for breaking systems into short
  3376.           enough systems to fit between the horizontal margins.  If you
  3377.           have too few measures on a staff when it is justified, it will
  3378.           look too sparse.  If you have too many, it will extend past the
  3379.           right margin.  There are additional considerations.  You want the
  3380.           last staff to have the same density of notes as previous staves.
  3381.           You may want the last page to be "filled".   The Cast-off
  3382.           commands do much of this for you.
  3383.  
  3384.           The Cast-off Quick command divides the staves up in either the
  3385.           block or the entire score so that each contains the same number
  3386.           of measures.  You specify how many measures this is to be.  This
  3387.           casting off is done regardless if all the resulting staves will
  3388.           fit between the margins or not.  Often popular and folk music
  3389.           scores lend themselves to 3 or 4 measures per staff formatting.
  3390.  
  3391.           The Cast-off Full command yields results that are closest to
  3392.           those described in the initial paragraph of this section.  You
  3393.           can optionally specify the maximum number of measures per staff
  3394.           to appear.
  3395.  
  3396.           The Cast-off Page-breaks command only determines page breaks.  It
  3397.           will insure that a specified number of systems occur on each page
  3398.           if possible.
  3399.  
  3400.           Cast-off will not join systems with different numbers of staves.
  3401.           If you want the first measure of the current system to always be
  3402.           the first measure of a system after cast-off is invoked, you can
  3403.           press .  If the first measure of the current staff is so set, the
  3404.           letter B will appear in the second column of the bottom status
  3405.           line.
  3406.  
  3407.           Staff Line Thickness
  3408.           -----
  3409.           For laser and inkjet printer scores, the thickness of staff lines
  3410.           can be varied from 2 to 5 using the View Options staff-Line
  3411.           command.  The default thickness is 4.
  3412.  
  3413.  
  3414.                     MusicEase  -  Chapter 9: SOUND AND MIDI / 60
  3415.  
  3416.  
  3417.           9
  3418.                     Sound and MIDI
  3419.  
  3420.  
  3421.           In this chapter we describe how to play scores using the
  3422.           computer's oscillator and how to enter notes and playback scores
  3423.           via a MIDI instrument.
  3424.  
  3425.           Your Computer's Oscillator
  3426.           -----
  3427.           Your computer has a single oscillator that can be used to play
  3428.           back one note at a time.  You do this through the plaY command.
  3429.           You can select whether to play the entire score, the block or
  3430.           just the current staff, whether to play the upper or lower voice,
  3431.           the tempo, and the top or bottom note of chords.
  3432.  
  3433.           Pressing any computer key cancels playback.  You can quickly
  3434.           invoke this playback by pressing upper case S while editing.  The
  3435.           most recent settings of the plaY menu are used.
  3436.  
  3437.           MIDI Port
  3438.           -----
  3439.           If you have a MIDI card in your computer compatible with the MPU-
  3440.           401 and a MIDI instrument (MIDI In) attached to it, you can hear
  3441.           your scores played back using as many voices as your MIDI
  3442.           instrument can handle.  Before you do so though, you must specify
  3443.           the port your card uses if it is different than the default port
  3444.           of hex 330.  To change the port, issue a Midi Options command and
  3445.           enter the port number.
  3446.  
  3447.           MIDI Playback
  3448.           -----
  3449.           Be sure your MIDI instrument is turned on.  Then issue the Midi
  3450.           Playback command.  The entire score, the block, the current
  3451.           system or the current staff can be played.  You specify the tempo
  3452.           and whether or not you want the playback to be continuously
  3453.           repeated (until you press any computer key).
  3454.  
  3455.           Only visible staves are used.  If you want to hear what two
  3456.           specific staves sound like when played together, just make the
  3457.           other staves invisible.  The speed key for Midi playback with its
  3458.           most recent settings is } (right curly bracket).
  3459.  
  3460.           MIDI Step Mode Note Entry
  3461.           -----
  3462.           MIDI step mode note entry is supported through the Midi Step
  3463.           command.  The pitches come from the MIDI instrument (MIDI out)
  3464.           while the durations come from the current duration.  Thus you can
  3465.           enter several notes at once (i.e., chords) by playing several
  3466.           pitches at once on your MIDI instrument.  You can change the
  3467.           duration of notes being entered using the digit keys on your
  3468.           computer keyboard (see the description of the current duration in
  3469.           Chapter 4.)  You can enter rests and invisible notes, system
  3470.  
  3471.  
  3472.                     MusicEase  -  Chapter 9: SOUND AND MIDI / 61
  3473.  
  3474.  
  3475.           (Enter) and staff (Ctrl-Enter) ends and redisplay the current
  3476.           staff or entire window without leaving step mode entry.
  3477.  
  3478.           You can have the screen updated as you enter notes, but you must
  3479.           wait until the screen has finished updating before entering the
  3480.           next note.  The speed key for Midi step mode note entry with its
  3481.           most recent settings is { (left curly bracket).
  3482.  
  3483.           MIDI Realtime Note Entry
  3484.           -----
  3485.           MIDI realtime note entry using the Midi Realtime command lets you
  3486.           play notes on your MIDI instrument.  They are inserted before the
  3487.           current note with both the pitch and duration of notes being
  3488.           taken from the MIDI instrument.
  3489.  
  3490.           In order for this to work, you must play some count-in notes
  3491.           which are used to determine the tempo.  You must play at a steady
  3492.           tempo throughout the entire realtime entry procedure.  You can
  3493.           use a metronome.  Often there is one built into MIDI
  3494.           synthesizers.  You can also play more slowly than normal.  This
  3495.           usually increases the likelihood that durations are interpreted
  3496.           correctly because your playing will be more accurate relative to
  3497.           the longer time span.
  3498.  
  3499.           Count-in Notes
  3500.           -----
  3501.           You can select from 2 to 10 count-in notes.  Then select the
  3502.           duration of the count-in notes where 1 means all are a whole note
  3503.           in duration, 2 means they are a half note in duration, 4 means
  3504.           quarter note, 8 means eighth note and so on.  The count-in notes
  3505.           are not included in the resulting score.
  3506.  
  3507.           Quantization
  3508.           -----
  3509.           The notes you play in are quantized using the duration you select
  3510.           in the Quantize field.  This duration can be from a whole note to
  3511.           a sixty-fourth note.  Best results are obtained by choosing the
  3512.           duration which equals the duration of the shortest note you will
  3513.           play in.  If the shortest note in your piece is an eighth note,
  3514.           you should select to quantize using an eighth note.  Any notes
  3515.           shorter  will be interpreted as eighth notes.  Thus your playing
  3516.           does not have to be quite as accurate duration-wise as if you
  3517.           chose to quantize using a sixteenth note.  The quantization
  3518.           duration must not be longer than the count-in duration.
  3519.  
  3520.           Two Staves
  3521.           -----
  3522.           The MIDI input will be placed on either one or two staves
  3523.           depending on the value you select for the Staves field.  If you
  3524.           select two staves, you must enter the pitch at which to split the
  3525.           notes.  All the notes with pitches higher than the Split-at pitch
  3526.           are placed on the current staff while the other notes are placed
  3527.           on the staff immediately below and connected to the current
  3528.           staff.  For example to have the notes played onto a treble staff
  3529.  
  3530.  
  3531.                     MusicEase  -  Chapter 9: SOUND AND MIDI / 62
  3532.  
  3533.  
  3534.           which has a bass staff connected to it directly below it, set the
  3535.           first staff to the correct meter, key and clef sign.  Then press
  3536.           Ctrl-Enter and do the same to the resulting staff.  Then connect
  3537.           the two staves using the View Connect command.  Lastly move the
  3538.           cursor back to the first staff.  Now you are ready.
  3539.  
  3540.           MIDI pitches are specified by positive integers.  Middle C is 60.
  3541.           The B just below it is 59.  The Bb below it is 58.  The octave
  3542.           above middle C is 72.
  3543.  
  3544.           When You Are Done
  3545.           -----
  3546.           When you have finished with realtime MIDI note entry, the notes
  3547.           you have entered reside in one long system.  Before continuing,
  3548.           you might want to save the score (see the Transfer Save command)
  3549.           just in case something goes wrong later.  If it is to begin with
  3550.           a partial measure (i.e., there are some pickup notes), enter the
  3551.           appropriate bar line now on each staff.  Then either use the
  3552.           Cast-off command to divide this system up into page-width systems
  3553.           or manually position the cursor to where you want the breaks and
  3554.           press the Enter key.
  3555.  
  3556.           MIDI Files
  3557.           -----
  3558.           MusicEase both reads and writes MIDI files of format 0 or 1.
  3559.           When you load a file, MusicEase automatically detects if it is a
  3560.           MIDI file.  If so, it converts the MIDI data to its own
  3561.           representation after it reads it in.  This can take a while.
  3562.  
  3563.           To save a score as a MIDI file, use Transfer saVe-midi-file.
  3564.           Besides entering the name, you can select the type.  Generally
  3565.           you should specify 1 unless the software with which this file
  3566.           will be used only reads format 0 MIDI files.  With format 0, all
  3567.           staves are merged into a single MIDI track.  With format 1, there
  3568.           is one track for each voice in each staff.  The preferred file
  3569.           extension for MIDI files is "MID".  For format 0 files, only
  3570.           visible staves are saved.
  3571.  
  3572.           MIDI files save just information about notes.  Lyrics, chords,
  3573.           symbols and etc. are not saved.  You should never save a score as
  3574.           a MIDI file if you want to read it back into MusicEase later on
  3575.           with no loss of information.  SMPTE time codes are not supported.
  3576.  
  3577.  
  3578.                      MusicEase  -  Chapter 10: TRANSPOSING / 63
  3579.  
  3580.  
  3581.           10
  3582.                     Transposing
  3583.  
  3584.  
  3585.           In this chapter we describe how to transpose, invert, retrograde,
  3586.           shift by a specified number of half steps, add notes a specified
  3587.           number of half notes away and divide notes up so they do not
  3588.           extend across bar lines or beat boundaries.
  3589.  
  3590.           Transposing
  3591.           -----
  3592.           To transpose a score or block, invoke modiFy Transpose.  You must
  3593.           enter the number of half steps by which to transpose, the
  3594.           direction (up or down) and whether inharmonically equivalent
  3595.           notes are to be used when possible.  For example, the note A
  3596.           double flat is inharmonically equivalent to G.  If you selected
  3597.           Yes for using inharmonic equivalents, any A double flats which
  3598.           occur in the transposition would be replaced by G's.
  3599.  
  3600.           When executing a Transpose command, MusicEase first checks if the
  3601.           resulting notes would lie within the range of notes that
  3602.           MusicEase handles.  This range extends from approximately three
  3603.           octaves below middle C to four octaves above.  MusicEase changes
  3604.           chord names correctly when transposing but not chord frames.
  3605.  
  3606.           Inverting
  3607.           -----
  3608.           You can invert the entire score about a note or just the block.
  3609.           The inversion occurs about the first note in the invert region.
  3610.           If this note is a chord, the bottom most note is used.  To
  3611.           invert, use the modiFy Invert command.  It works similar to the
  3612.           transpose command.  You first select the region to invert, the
  3613.           voice to invert and whether the inversion is to remain in key or
  3614.           be a strict inversion.
  3615.  
  3616.           Retrograding
  3617.           -----
  3618.           You can retrograde the entire score or just the block.  To
  3619.           retrograde, use the modiFy Retrograde command.  It works similar
  3620.           to the transpose command.  You first select the region to
  3621.           retrograde, the voice or both to retrograde both voices, whether
  3622.           the resulting notes are to remain in key or not (the key pattern
  3623.           is not reversed) and whether inharmonic equivalences are to be
  3624.           used.
  3625.  
  3626.           Shifting
  3627.           -----
  3628.           To shift notes up or down by a specific number of half steps
  3629.           (like transposition but the key remains unchanged), issue the
  3630.           modiFy Shift command.  You can shift either just the block or the
  3631.           entire score.  You specify the direction to shift, the voice to
  3632.           shift (or both voices if you like) and whether the result is to
  3633.           remain in key or the shift is to be strict.
  3634.  
  3635.  
  3636.                      MusicEase  -  Chapter 10: TRANSPOSING / 64
  3637.  
  3638.  
  3639.           Adding
  3640.           -----
  3641.           You can add a note to each note or chord in the block or entire
  3642.           piece.  This is, for instance, a quick way to double notes at the
  3643.           octave.  The modiFy Add command permits this operation.  You
  3644.           specify the number of half steps above or below the top note in
  3645.           the desired voice at which notes are to be added, whether added
  3646.           notes are to be forced to remain in key or not, and whether
  3647.           inharmonic equivalences should be used.
  3648.  
  3649.           Erasing
  3650.           -----
  3651.           Erasing is the inverse of adding.  It can be used to delete a
  3652.           note from each chord in a range of the score.  To erase, invoke
  3653.           modiFy Erase.  In addition to the range, you specify the number
  3654.           of the note from the top of the chord to erase.  You also select
  3655.           either the top or bottom voice or both from which to erase.  If
  3656.           only one note exists in the chord at any point, no erasure is
  3657.           performed.
  3658.  
  3659.           Dividing
  3660.           -----
  3661.           The dividing operation replaces notes that extend across barlines
  3662.           by several tied notes which add up to the same duration as the
  3663.           original note but which do not extend across bar lines.
  3664.           Optionally it will do the same to notes which extend across beat
  3665.           boundaries.  It can also be used to force notes into the current
  3666.           key and to replace notes by their inharmonic equivalents.
  3667.  
  3668.           ModiFy Divide can be applied to the entire score, the block, the
  3669.           current system or just the current staff with respect to one or
  3670.           both voices.  Dividing is useful, when notes have been entered
  3671.           using MIDI realtime note entry or MIDI files.  In the MIDI world
  3672.           there is no concept of a tied note --- a note is either on or
  3673.           off.
  3674.  
  3675.  
  3676.                        MusicEase  -  Chapter 11: WINDOWS / 65
  3677.  
  3678.  
  3679.           11
  3680.                     Windows
  3681.  
  3682.  
  3683.           We now describe how the windowing system works.  Windows can be
  3684.           used to work with several different scores at the same time.
  3685.  
  3686.           The window in which the cursor currently resides is the "current
  3687.           window".  If there is more than one window (a result of the
  3688.           Window Split command), each window will have a border and in the
  3689.           upper left corner will be a number.  This is the name of that
  3690.           window.  The name of the current window is highlighted.  Windows
  3691.           can be split either horizontally or vertically.
  3692.  
  3693.           You can also create new window panes which reside conceptually on
  3694.           top of or underneath of the current window using the Window Open
  3695.           command.  Window panes act otherwise just like another window.
  3696.           The only difference is that only one pane in a window is visible
  3697.           at a time.
  3698.  
  3699.           Opening a New Window Pane
  3700.           -----
  3701.           To open a new top window pane, issue a Window Open command and
  3702.           then select Score.  This creates a new window pane which is the
  3703.           same size as the current window and resides in the same place.
  3704.           An empty staff will appear in the upper left corner of the new
  3705.           window pane.  To move from one window pane to another, use the
  3706.           Window Flip command or press the F2 function key.
  3707.  
  3708.           Closing a Window
  3709.           -----
  3710.           To close the current window, issue a Window Close command.  If
  3711.           the score in this window has not been saved since last changed,
  3712.           you will first be asked if you really want to close the window
  3713.           and lose the edited score.
  3714.  
  3715.           Splitting a Window
  3716.           -----
  3717.           You can open a new window by splitting the current window.  The
  3718.           window can be split either horizontally or vertically.  One of
  3719.           the new windows will contain the score in the old window while
  3720.           the other window will be empty except for the initial staff.
  3721.  
  3722.           To split the current window horizontally, issue a Window Split
  3723.           Horizontal command.  You will be asked at which line to split the
  3724.           window.  Windows have a minimum height of 6 lines.
  3725.  
  3726.           To split the current window vertically, issue a Window Split
  3727.           Vertical command.  You will be asked at which line to split the
  3728.           window. Windows have a minimum width of 22 columns.
  3729.  
  3730.           To jump from one window to another use either the Window Goto
  3731.           command with a window number or the or Window Previous command.
  3732.           The F1 function key can also be used.
  3733.  
  3734.  
  3735.                       MusicEase  -  Chapter 12: SOME HINTS / 66
  3736.  
  3737.  
  3738.           12
  3739.                     Some Hints
  3740.  
  3741.  
  3742.           This chapter describes some techniques for shortening the amount
  3743.           of time necessary to create scores and other things.  One
  3744.           technique we focus on is to minimize the number of keystrokes.
  3745.  
  3746.           Selecting Menu Items
  3747.           -----
  3748.           When you have an option field from which you need to select a
  3749.           value, do not use the Spacebar to move the highlight to the
  3750.           desired value.  Instead press the capital letter in the value
  3751.           instead.  If this is the only field in the menu, this selects the
  3752.           item and also acts like you have pressed the Enter key to boot.
  3753.  
  3754.           Speed Keys
  3755.           -----
  3756.           When you are editing a score, it is time consuming to escape to
  3757.           the command menu, press one or more keys to get to the desired
  3758.           menu, and when you are finished with the menu, press Enter to
  3759.           return to editing.  Whenever possible, use a speed key to get
  3760.           directly to the menu.  For instance, to change the clef, press
  3761.           upper case L.  This saves 3 or more keystrokes in each instance.
  3762.           Especially make use of the following speed keys:
  3763.  
  3764.           * To copy the previous note or chord, press ' (single  quote),
  3765.  
  3766.           * To create a note tied to the previous note or chord, press t,
  3767.  
  3768.           * To insert a slur for the immediately preceding notes, press
  3769.             Alt-S,
  3770.  
  3771.           * To insert a wedge for the immediately preceding notes, press >
  3772.             (right angular bracket),
  3773.  
  3774.           * To insert a tuplet for the immediately preceding notes, press
  3775.             ; (semicolon),
  3776.  
  3777.           * To beam the immediately preceding notes, press Alt-_ (Alt
  3778.             underscore),
  3779.  
  3780.           * To enter a chord frame entered previously, use Alt-H.
  3781.  
  3782.           See the Appendix for a complete list of speed keys.
  3783.  
  3784.           Lyrics
  3785.           -----
  3786.           Use the Insert lYric-line command as much as possible.  When
  3787.           repeating identical lines of lyrics onto different staves in a
  3788.           system, use the F3 key.
  3789.  
  3790.           Several Chords On One Note
  3791.           -----
  3792.  
  3793.  
  3794.                       MusicEase  -  Chapter 12: SOME HINTS / 67
  3795.  
  3796.  
  3797.           If you are entering several chords to appear at different points
  3798.           in a single note's duration and if there is only one voice at
  3799.           this point in the current staff, you might insert invisible notes
  3800.           in the other voice and attach the chords to them.  Each invisible
  3801.           note should have a duration equal to the duration of the chord
  3802.           attached to it.  When this staff is justified, the chords will be
  3803.           positioned appropriately.
  3804.  
  3805.           Notice that if this staff is the only one in its system, you
  3806.           could use the chord Beat field to specify the chords' positions.
  3807.           However if this staff is only one of several, different beats may
  3808.           justify to different widths depending on various factors.  Then
  3809.           the invisible note technique would yield correct positioning
  3810.           whereas the beat method might not.
  3811.  
  3812.           Cursor Movement
  3813.           -----
  3814.           For movements of more than several notes, use the keys which move
  3815.           you larger distances.
  3816.  
  3817.           Use Home to move to the start of a staff, End to move to the end
  3818.           of a staff, Ctrl-F or Ctrl-R to move to the start of the next
  3819.           measure, Ctrl-A or Ctrl-- to move to the previous start of
  3820.           measure, Ctrl-Home to move to the top staff in the window,
  3821.           Ctrl-End to move to the bottom staff in the window, Ctrl-PgUp to
  3822.           move to the start of the score, and Ctrl-PgDn to move to the
  3823.           start of the last staff in the score.
  3824.  
  3825.           To move to a specific staff on a specific page, use the jUmp
  3826.           command.
  3827.  
  3828.           Speeding Up Screen Redisplays
  3829.           -----
  3830.           Edit with Quick set to Yes as much as possible.  Also Zoom when
  3831.           you can.  This saves both horizontal and vertical scrolling.
  3832.           Sometimes splitting a window in half or less so only one staff
  3833.           shows at a time can also significantly speed up the redisplay
  3834.           time.
  3835.  
  3836.           If you are working with systems with more than one staff and are
  3837.           entering one part completely (for the whole score) before moving
  3838.           to the next, use the View Visible command so that only this staff
  3839.           of the system appears.
  3840.  
  3841.           Avoid very long staves when possible.  (The redisplay routines
  3842.           calculate from the beginning of staves.)
  3843.  
  3844.           Longer Scores
  3845.           -----
  3846.           Long scores can be created with MusicEase by creating them as a
  3847.           number of shorter scores (files).  If the amount of free memory
  3848.           falls below 30%, you should save your score and continue the
  3849.           score with a fresh file.  Each shorter score should end on a page
  3850.           boundary as print outs come in pages.  If you are using a running
  3851.  
  3852.  
  3853.                       MusicEase  -  Chapter 12: SOME HINTS / 68
  3854.  
  3855.  
  3856.           head with page numbers, set the starting page number for each
  3857.           short score appropriately using the Print Layout Options command.
  3858.           Leave the title, composer and lyricist blank for each score but
  3859.           the first.
  3860.  
  3861.           Error Messages
  3862.           -----
  3863.           If an error message appears, please save the song and send us the
  3864.           disk along with a description of where the error occurred.  We
  3865.           will try to fix the problem for you.  To stop the error message
  3866.           from reappearing, delete the thing added which caused the error.
  3867.           If all else fails, delete the note or notes at that point.
  3868.  
  3869.  
  3870.                               MusicEase  -  Index / 69
  3871.  
  3872.  
  3873.           Appendix 1
  3874.  
  3875.  
  3876.                     Speed Keys
  3877.  
  3878.  
  3879.           In this appendix we list all the speed key definitions in one
  3880.           place.
  3881.  
  3882.           Ctrl-A    Jump left to measure start.
  3883.  
  3884.           Ctrl-C    Page down.
  3885.  
  3886.           Ctrl-D    Cursor right.
  3887.  
  3888.           Ctrl-E    Cursor up.
  3889.  
  3890.           Ctrl-F    Jump right to measure start.
  3891.  
  3892.           Ctrl-G    Delete current note (same as Del).
  3893.  
  3894.           Ctrl-H    Delete note to left (same as Backspace).
  3895.  
  3896.           Ctrl-I    Make the notehead of the current note invisible and the
  3897.                     next note the current note.
  3898.  
  3899.           Ctrl-J    Insert staff start (same as Ctrl-Enter).
  3900.  
  3901.           Ctrl-L    Repeat Replace or Search command.
  3902.  
  3903.           Ctrl-M    Same as Enter.
  3904.  
  3905.           Ctrl-N    Set Pitch mode.
  3906.  
  3907.           Ctrl-R    Page up.
  3908.  
  3909.           Ctrl-S    Cursor left.
  3910.  
  3911.           Ctrl-T    Delete notes to next measure start.
  3912.  
  3913.           Ctrl-U    Undelete command.
  3914.  
  3915.           Ctrl-V    Toggle field edit insert mode.
  3916.  
  3917.           Ctrl-W    View Note-width menu.
  3918.  
  3919.           Ctrl-X    Cursor down.
  3920.  
  3921.           Ctrl-Z    Repeat most recent Insert Symbol command and move 
  3922.                     cursor 1 character to right.
  3923.  
  3924.           Ctrl-_    Same as Backspace except if at the start of a staff, it
  3925.                     is the opposite of Ctrl-Enter.
  3926.  
  3927.  
  3928.                               MusicEase  -  Index / 70
  3929.  
  3930.  
  3931.           Alt-H     Quick repeat chord command.
  3932.  
  3933.           h         Insert Chord menu.
  3934.  
  3935.           H         View heading menu.
  3936.  
  3937.           Alt-I     Make stem of current note and flag or beam invisible 
  3938.                     and next note the current note.
  3939.  
  3940.           i         Insert invisible note.
  3941.  
  3942.           Alt-J     Join two notes by duration.
  3943.  
  3944.           j         Insert Slur Start menu.
  3945.  
  3946.           J         Insert Slur End menu.
  3947.  
  3948.           k         Insert Key menu.
  3949.  
  3950.           K         Fast View Accidental for previous note.
  3951.  
  3952.           l         Insert Lyric menu.
  3953.  
  3954.           L         Insert Clef menu.
  3955.  
  3956.           Alt-M     Insert Rests menu.
  3957.  
  3958.           m         Insert Meter menu.
  3959.  
  3960.           Alt-N     Replace duration of current note with current duration.
  3961.  
  3962.           n         Set Insert mode.
  3963.  
  3964.           N         Set Replace mode.
  3965.  
  3966.           +         Set Add-to mode.
  3967.  
  3968.           -         Set Delete-from mode.
  3969.  
  3970.           Alt-O     Redisplay current staff.
  3971.  
  3972.           Ctrl-O    Redisplay current system
  3973.  
  3974.           o         View Connect menu.
  3975.  
  3976.           O         Redisplay current window.
  3977.  
  3978.           Alt-P     Insert Staff-break for cast-off.
  3979.  
  3980.           p         Insert Tuplet menu.
  3981.  
  3982.           P         Insert New-page menu.
  3983.  
  3984.           q         Toggle "quick" and full redisplay.
  3985.  
  3986.  
  3987.                               MusicEase  -  Index / 71
  3988.  
  3989.  
  3990.           Alt-R     Insert low rest.
  3991.  
  3992.           r         Insert rest.
  3993.  
  3994.           R         Insert high rest.
  3995.  
  3996.           Alt-S     Quick define slur command.
  3997.  
  3998.           s         Insert Symbol menu.
  3999.  
  4000.           S         Invoke Play menu.
  4001.  
  4002.           Alt-T     View Staff menu.
  4003.  
  4004.           t         Quick tie notes command.
  4005.  
  4006.           T         Tie current note to next note.
  4007.  
  4008.           Alt-U     Shift note entry 2 octaves down.
  4009.  
  4010.           u         Set note entry to normal.
  4011.  
  4012.           U         Shift note entry 2 octaves up.
  4013.  
  4014.           Alt-V     View Shift menu.
  4015.  
  4016.           v         Toggle current voice.
  4017.  
  4018.           V         Transfer Save menu.
  4019.  
  4020.           Alt-W     Insert low whole measure rest.
  4021.  
  4022.           w         Insert whole measure rest.
  4023.  
  4024.           W         Insert high whole measure rest.
  4025.  
  4026.           Alt-X     Cycles current notehead shape between normal, X and 
  4027.                     diamond.
  4028.  
  4029.           x         Insert Text menu.
  4030.  
  4031.           X         Erase menu.
  4032.  
  4033.           Alt-Y     Delete current staff.
  4034.  
  4035.           y         Insert Dynamic menu.
  4036.  
  4037.           Y         Insert Lyric-line menu.
  4038.  
  4039.           z         Zoom menu.
  4040.  
  4041.           Alt--     Quick View Beam.
  4042.  
  4043.           _         View Beam menu.
  4044.  
  4045.  
  4046.                               MusicEase  -  Index / 72
  4047.  
  4048.  
  4049.           [         Shift note 1 octave up.
  4050.  
  4051.           ]         Shift note 1 octave down.
  4052.  
  4053.           {         Invoke MIDI Step-mode menu.
  4054.  
  4055.           }         Invoke MIDI Playback-mode.
  4056.  
  4057.           /         Insert repeated figure measure.
  4058.  
  4059.           \         Quick Insert Slide command.
  4060.  
  4061.           0         Insert Ending command.
  4062.  
  4063.           7         Quick Justify system command.
  4064.  
  4065.           Alt-7     Quick Unjustify system command.
  4066.  
  4067.           Alt-!     If at beam start, flip beam direction
  4068.  
  4069.           !         Flip direction of current note stem.
  4070.  
  4071.           &         Jump to next system.
  4072.  
  4073.           ^         Jump to previous system.
  4074.  
  4075.           |         Insert Bar menu.
  4076.  
  4077.           >         Quick Insert Wedge command.
  4078.  
  4079.           ;         Quick Insert Tuplet command.
  4080.  
  4081.           =         Make flags or beams of current note invisible.
  4082.  
  4083.           Home      Jump to staff start.
  4084.  
  4085.           Ctrl-Home Jump to top staff in window.
  4086.  
  4087.           End       Jump to staff end.
  4088.  
  4089.           Ctrl-End  Jump to bottom staff in window.
  4090.  
  4091.           PgUp      Jump up about a screenful.
  4092.  
  4093.           Ctrl-PgUp Jump to start of score.
  4094.  
  4095.           PgDn      Jump down about a screenful.
  4096.  
  4097.           Ctrl-PgDn Jump to start of last staff.
  4098.  
  4099.           Ctrl-Q A  Replace menu.
  4100.  
  4101.           Ctrl-Q B  Jump to block start.
  4102.  
  4103.  
  4104.                               MusicEase  -  Index / 73
  4105.  
  4106.  
  4107.           Ctrl-Q C  Jump to start of last staff.
  4108.  
  4109.           Ctrl-Q D  Jump to staff end.
  4110.  
  4111.           Ctrl-Q E  Jump to top staff in window.
  4112.  
  4113.           Ctrl-Q F  Search menu.
  4114.  
  4115.           Ctrl-Q K  Jump to block end.
  4116.  
  4117.           Ctrl-Q P  Jump to last position.
  4118.  
  4119.           Ctrl-Q R  Jump to start of score.
  4120.  
  4121.           Ctrl-Q S  Jump to staff start.
  4122.  
  4123.           Ctrl-Q T  Delete from start of measure to just before current 
  4124.                     note.
  4125.  
  4126.           Ctrl-Q X  Jump to bottom staff in window.
  4127.  
  4128.           Ctrl-Q 0  Jump to bookmark 0.
  4129.  
  4130.           Ctrl-Q 1  Jump to bookmark 1.
  4131.  
  4132.           Ctrl-Q 2  Jump to bookmark 2.
  4133.  
  4134.           Ctrl-Q 3  Jump to bookmark 3.
  4135.  
  4136.           Ctrl-P C  Copy contiguous block.
  4137.  
  4138.           Ctrl-P R  Merge file as contiguous block.
  4139.  
  4140.           Ctrl-P V  Move contiguous block.
  4141.  
  4142.           Ctrl-P W  Write contiguous block to file.
  4143.  
  4144.           Ctrl-P Y  Delete contiguous block.
  4145.  
  4146.           Ctrl-K A  Transfer Clear menu.
  4147.  
  4148.           Ctrl-K B  Set block start.
  4149.  
  4150.           Ctrl-K C  Copy system block.
  4151.  
  4152.           Ctrl-K D  Transfer Save menu.
  4153.  
  4154.           Ctrl-K K  Set block end.
  4155.  
  4156.           Ctrl-K Q  Transfer Clear menu.
  4157.  
  4158.           Ctrl-K R  Merge file as system block.
  4159.  
  4160.           Ctrl-K S  Transfer Save menu.
  4161.  
  4162.  
  4163.                               MusicEase  -  Index / 74
  4164.  
  4165.  
  4166.           Ctrl-K V  Move system block.
  4167.  
  4168.           Ctrl-K W  Write system block to file.
  4169.  
  4170.           Ctrl-K Y  Delete system block.
  4171.  
  4172.           Ctrl-K 0  Jump to bookmark 0.
  4173.  
  4174.           Ctrl-K 1  Jump to bookmark 1.
  4175.  
  4176.           Ctrl-K 2  Jump to bookmark 2.
  4177.  
  4178.           Ctrl-K 3  Jump to bookmark 3.
  4179.  
  4180.  
  4181.                             MusicEase  -  Appendix 2 / 75
  4182.  
  4183.           MusicEase Professional
  4184.           ----------------------
  4185.  
  4186.           MusicEase Professional is an expanded version of MusicEase which
  4187.           contains the following additional features:
  4188.  
  4189.           -  Perhaps the most significant added feature is the ability to
  4190.           reduce or enlarge scores from 10% to 190% of normal size (laser
  4191.           and inkjet printers *only*).
  4192.  
  4193.           This allows, for instance, the reduction of lead sheets (e.g.,
  4194.           melody, chord names, and lyrics) so a whole song can fit onto a
  4195.           single printed page.  Ensemble and band scores often need to be
  4196.           reduced to about 70% to produce a pleasing result that fits
  4197.           nicely onto normal 8-1/2 by 11 inch pages. Such reduction usually
  4198.           allows two systems per page.  For orchestral works, an even
  4199.           larger amount of reduction can produce an entire system on a
  4200.           single page for use by conductors or for just printing the entire
  4201.           piece.  For school age children, enlargements allow for music
  4202.           that is easier to read.
  4203.  
  4204.           Cast-off, Justify and Print Preview take any such scaling into
  4205.           account when deciding where to break staves/systems, and how to
  4206.           justify and display them.
  4207.  
  4208.           -  Grace notes with several different characteristics can be
  4209.           created out of normal notes to appear before, on or after the
  4210.           beat.  You can specify the direction of the stems and if a slash
  4211.           should appear through the first stem.  Slurs, symbols, and
  4212.           everything else that can be attached to normal notes can also be
  4213.           attached to grace notes.  They can also be deleted, copied and
  4214.           moved the same way.
  4215.  
  4216.           -  Cue notes can be created which work just like ordinary notes.
  4217.           You can make all stems point up or down if you like.
  4218.  
  4219.           -  Phrase marks can be added over slurred groups and in general
  4220.           work and look just like slurs.
  4221.  
  4222.           -  Fingered tremelos can be created out of paired notes as
  4223.           follows: enter the 2 notes with half the desired duration - e.g.,
  4224.           for a half note fingered tremelo enter 2 quarter notes.  Then
  4225.           press the speed key for fingered tremelos and select the number
  4226.           of bars, any change in vertical spacing, any vertical shifting,
  4227.           and any horizontal shifting of the left and right ends.
  4228.           Otherwise the pair of notes are treated exactly like normal notes
  4229.           as far as justification and the attachment of slurs and other
  4230.           things is concerned.
  4231.  
  4232.           -  A "Print to File" feature permits changing the destination of
  4233.           print to a file.  The file can then be copied to an alternate 
  4234.           printer port (i.e. LPT2), or taken to another physical location,
  4235.  
  4236.  
  4237.                             MusicEase  -  Appendix 2 / 76
  4238.  
  4239.  
  4240.           perhaps where a suitable laser printed is located, where it can
  4241.           then be sent to a printer using the DOS "PRINT" command or the 
  4242.           DOS "TYPE" or "COPY" command lines. For example:
  4243.  
  4244.                TYPE filename > LPT2:   
  4245.                COPY filename PRN
  4246.                COPY filename COM3:
  4247.                PRINT /D:LPT3: filename
  4248.  
  4249.           -  Another feature permits erasing a voice through the entire
  4250.           piece.  This can be useful when performing part extractions in
  4251.           ensemble pieces.
  4252.  
  4253.           MusicEase Professional costs $99 and is available from RMH
  4254.           Computer Services.  All MusicEase files are upwardly compatible
  4255.           with MusicEase Professional.
  4256.